Thanks John

On Oct 18, 2012 2:37 PM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote:

Freddie

 

Honing powder will remove etching and even scratches as long as you use the right grit, if you have etching then you may need to start with a 250 or perhaps a 120 grit powder. Then work your way through the grits  and then polish. 

Due to the un even stones diamond would not be recommended nor would I recommend any of the diamond pads .

 

 

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

 

From: Freddie DeJesus [mailto:info@eliteflooringandrefinishing.com]
Sent: Thursday, October 18, 2012 10:23 AM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] Etch marks?

 

Hi partners,
The mosaic floor was originally a high gloss finish. The homeowner had somebody come in and hone it so that it had less shine. The marble looks to me like white thassos. It appears like it has been etched with something. Any suggestions on honing this to match the other finish? Will honing powders alone remove etching?


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)