http://www.mbstonepro.com/engineered-stone-pads
We also sell pumice powder-but we haven't put it on the site yet.You can call us on that one and we can send you a lb.

On Wed, Apr 19, 2017 at 11:40 AM, hector castillo <hectorcastillo@comcast.net> wrote:

I can not find these pads? Who sells them?

Hector Castillo

 

From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Stuart Rosen
Sent: Wednesday, April 19, 2017 6:42 AM


To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: [QUAR] Pental Quartz Super white 2cm

 

Tony

I would try using specific ES diamonds(ex:gama pads) up to the buff pad then use MB-20 to finish.

Then a 2X fine pumice powder(wet) to bring back the "snakeskin"

 

On Wed, Apr 19, 2017 at 1:38 AM, Tony Deluna <tndeluna@gmail.com> wrote:

Hi Eric, the epoxy is not my problem, it's the polish... I've polished a lot of Quartz too and this is the only one I've had problems with. 

It's not a high Shine, more of a Med to low sheen polish. Like a travertine honed with a 1200 grit honing powder. But the hone powder didn't do anything at all neither did the other polishing compounds. 


On Apr 18, 2017, at 6:13 PM, Eric Vogel <evogel@countercrew.com> wrote:

I have polished quartz successfully. 

 

The most pure white epoxy I have found is the gran quartz white knife grade.  The trick with white quartz is the fact that its not actually white!  Under certain lighting 90% of white ES quartz on the market has a pinkish tone.  Only recently have the big ES manufactures started producing a “pure” white stone. 

 

When looking eye level at this stone does it have the snake skin finish?

 

Thank You,

Eric Vogel

Counter Crew

407-925-3796

www.countercrew.com

<image001.jpg>

 

From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Tony Deluna
Sent: Tuesday, April 18, 2017 9:07 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: [QUAR] Pental Quartz Super white 2cm

 

Hi Eric, yes all the miter seams need to be redone. Or they will make them reinstall all 10 counter tops in the house. I have to make a white epoxy that matches closer in all the seams & joints and refinish it flush. 

Half the seams have diamond swirl marks from 120 & 220. Getting them out is very difficult because they are so hard to see with out a halogen light. 

Then the Diamond pads leave skid mark on the white Quartz when they get too dry. I tried to minimize the water because they have natural finish unsealed wood floors!!! Every things masked but still... Ridiculous working conditions! 

Eric have you polished this Quartz before?


On Apr 18, 2017, at 5:10 PM, Eric Vogel <evogel@countercrew.com> wrote:

Looks like White Storm silestone or something of that suit.  What area are they having you polish, the miter seam on the leg?  That seam is awful. 

 

Thank You,

Eric Vogel

Counter Crew

407-925-3796

www.countercrew.com

<image001.jpg>

 

From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Tony Deluna
Sent: Tuesday, April 18, 2017 7:59 PM
To: Stone And Tile Pros Link <sccpartners@stoneandtilepros.simplelists.com>
Subject: [QUAR] Pental Quartz Super white 2cm
Importance: Low

 

Hey pro's has anyone polished this type of Quartz? It doesn't polish out like many others I've done.

It almost looks like a pearl white. I diamond honed to 1500 then I used Di-glo, 5x, 1200 hone powder & a few others. Nothing works... any ideas?

Pental Quartz super white 2cm

<image002.jpg>



<image003.jpg>

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 



 

--

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com




--
Regards,
Stu Rosen
201-446-1200
www.stoneshine.com
www.mbstonecare.com