Date: Wed, 3 Jun 2009 15:54:11 -0400
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] granite inserts
Zev,
In the past I have used clear packing tape. This has worked well allowing you to hone over the inserts provided you are not honing too low.
What type of marble are you honing and what grit are you starting at?
If you are starting with a 220 the clear packing tape should work fine.
Process for taping inserts
1. Tape over the inserts using a clear packing tape , use a high quality tape ,no cheap stuff.
2. Tap-e over the inserts
3. Using a razor blade cut the tape off on the grout line, when applying the tape be sure to be at least even with the grout line when cutting
4. Once you have cut the tape with the grout line make sure it has stuck to the granite securely.
5. Hone over the are slowly to make sure the tape does not come up.
6. If you have trouble with the tape sticking you may want to wipe off the granite inserts with acetone prior to applying the tape, let the acetone dry before trying to apply the tape
7. Once the job is honed take you single edge razor blade and along the grout line and you should be able to lightly lift off a corner of the tape and remove it
This process is somewhat time consuming but faster than honing around each insert.
Got any pictures , pictures are worth a 1000 words , whenever possible send pictures, several pictures work great.
Once the job is completed then send the before and after pictures, this helps everyone see the problems and the final result
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: stonerestorationplus@gmail.com [mailto:stonerestorationplus@gmail.com] On Behalf Of Zev Guez
Sent: Monday, June 01, 2009 11:20 PM
To: Restoration and Maintenance
Subject: [sccpartners] granite inserts
Hi I went to look at a marble floor with black granite inserts. I would like to hone the marble to remove the etching and cover the black granite . What would be the best thing to cover them with that will not come up with my diamond pads?
--
Zev Guez
Stone Restoration Plus
(732) 309-3878
www.stonerestorationplus.com
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)