Black I have not tried yet. I would think it would be close to a
220 resin.
From: rivera.gm@gmail.com
[mailto:rivera.gm@gmail.com] On Behalf Of Georgia Rivera
Sent: Friday, July 03, 2009 9:46 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] [sccpartners]
I believe the black ones are
the most coarse of the pads. But I don't know how they compare to honing
grits.
On Fri, Jul 3, 2009 at 9:07 PM, Baird Standish <bairdstandish@gmail.com> wrote:
Just to confuse the issue, I believe the twister pads run:
Green=1500
Yellow=800
white=400
In velocity pads,
Green =3000
yellow=1500
White=800
red=400
I think this is correct? Tough to keep straight if you have
a mix of both. There are also monkey pads but I'm not sure how the color coding
works on them. Anyway, maybe I'll invent independance pads and code them red,
white and blue. Happy 4th of July!
Baird
_________________
From Baird Standish
Managing Partner
Facility Specialists,LLC
1616 Walnut Street
Philadelphia, PA 19103
215-732-7505
On Jul 3, 2009, at 8:48 PM, "Randy Frye" <rfrye@comcast.net>
wrote:
The red I believe will remove the sealer. It’s similar to a 400 resin hone
From: rivera.gm@gmail.com [mailto:rivera.gm@gmail.com] On Behalf Of Georgia Rivera
Sent: Friday, July 03, 2009 8:43 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] [sccpartners]
Oh...I know them as a different name... We use these a lot. They do come in handy but wouldn't he need to remove the sealer first?
On Fri, Jul 3, 2009 at 8:40 PM, Randy Frye <rfrye@comcast.net> wrote:
http://www.htc-twister.com/en/Products/TWISTER.aspx
Anthony
These have their place in the stone restoration. I use them for certain jobs.
From: anthony@777-7797.com [mailto:anthony@777-7797.com]
Sent: Friday, July 03, 2009 7:37 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners]
What’s twisters again?
Anthony Masecchia
Master Stone Consultant
Marble Maestro
T. 514.777.7797
F. 514.904.1815
E. anthony@777-7797.com
Active President of BNI Westmount
From: Randy Frye [mailto:rfrye@comcast.net]
Sent: July-03-09 6:41 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners]
Joe
That’s what you call a nightmare floor.
Of course protect the wood.
I would try first a simple method and try and reactivate the sealer with the same sealer then buff it dry and into the stone.
If that didn’t work and the install (lippage) isn’t an issue, I go with the twister pads (red to white to yellow)and sand it off the return the stone back to the current look using the twisters.
Twister process I would charge around $1,600.00 mark.
Good luck
Randy, CLEANING EDGE
From: Stone & Grout Meister, LLC [mailto:mail@stoneandgroutmeister.com]
Sent: Friday, July 03, 2009 5:44 PM
To: Restoration and Maintenance
Subject: [sccpartners]
I got a client who just built a new home. They installed 1100 sq ft of travertine combined with wood trim (see photo). They bought the materials through or from Direct Buy and used Direct Buy’s installation contractor. Anyway …… the installer didn’t have a clue they used a sponge to apply Aqua Mix Enrich N Seal and never cleaned up the residue. According to the home owner the installer never cleaned the floor and they can see grout and dirt under the sealer/enhancer as well as foot prints. The owner wants the floor fixed ………. Any ideas on how to work around the wood trim, pricing, ect ? I was thinking about having the wood trim and baseboards removed. The trim has sealer/enhancer on it and I think it would cost less to replace the trim than pay me to work around it. I’ll probably have to level, fill and hone the floor. I was thinking about skipping from area - area with a 13 “ Hawk or would a DS 301 Planetary Polisher be more effective? Any ideas on pricing ? Thanks in advance for any help …..
Joe
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your
subscription preferences
Start a new
conversation (thread)
Powered by http://DiscussThis.com
Visit
list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation
(thread)