Joe,
There are several things I will comment on, first usually a good
alkaline stripper will remove most of the seal that may still be on the grout. If
you are seeing a seal on the grout you may have something other than a silicone
sealer. You may have an epoxy or polyurethane sealer on the grout. In these
cases you going to need something stronger than a Alkaline striper and will
probably need a methylamine based stripper. Or the Beanie Doo product I’ve
been told works fairly. One other way to check to see if the seal on topical or
not place some acid on the grout to see what happens , if nothing happens it
probably still coated , unless it an epoxy grout .
If you are going to clean and reseal with an impregnating seal
and there is no epoxy or polyurethane seal on the grout , then go in clean the
tile and the grout and re-seal.
That being said, the grout over time will get dirty again, my
next recommendation would be to ColorSeal the grout using the Grout Perfect Grout
coloring system.
This does several things:
1.
Give the grout a new look
2.
The customer can change the color if they wish
3.
Eliminate the inconsistency in the grout when you only clean (
some areas will clean up better then other)
4.
Make the cleaning by the customer a much easier process.
If you are not currently doing Grout coloring services I HIGHLY
recommend you start. Just as stone chemicals the grout coloring chemicals are
not created the same, I have tried several products on the market and found the
Grout Perfect product to be the best in coverage, the easiest to apply and
the easiest to clean up.
Currently in our restoration company we are doing 25 to 30 % of
our business Grout color sealing services. If you are already in the customers
home selling your marble services why not sell your grout services for
the ceramic tile?
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
-----Original Message-----
From: Dr Fred <fhueston@stoneandtilepros.com>
To: Restoration and Maintenance <sccpartners@stoneandtilepros.com>
Sent: Tue, Sep 1, 2009 5:20 am
Subject: RE: [sccpartners] Silicone Sealer
Joe,
its hard to tell if its silcone
or not, but place some water on the grout and see if it absorbs,,if it doesnt
it is sealed. try striping first with a good stripper and retest.
On Tue, Sep 1, 2009 at 2:17 AM, Stone & Grout Meister <mail@stoneandgroutmeister.com>
wrote:
I'm getting ready to clean and
seal about 400 sq ft of ceramic floor tile. The grout appears to have a sealer
on it, in some areas the sealer has broken down. I think the sealer is a
silicone base. Is their a quick and easy way to determine if it is a silicone
sealer? How long does a silicone sealer last under normal foot traffic in a
residential setting using the proper cleaning products compared to a
penetrating sealer? Could a fluoropolymer penetrating sealer be applied to the
grout without stripping the silicone sealer? Does anyone know of a silicone
sealer that I could buy off the shelf at a big box store? Thanks......
Joe Walters
Stone & Grout Meister, LLC
Tel: 505-890-3835
Cell: 505-859-0196
Fax: 866-920-2135
mail@stoneandgroutmeister.co
www.stoneandgroutmeister.com
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com
--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
My New Radio Show www.thestoneandtileshow.com
Become a Stone and Tile Inspector..sign up for our next class in October 2009
(only one class per year is offered) www.thestoneandtileschool.com
888-314-9077
702-314-1017
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit
list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation
(thread)