Has anyone used the Tenax 5x powder. It is all I can find here in australia that is reasonably priced. Wondering how it will preform on the jobs I have coming up.

Sent via BlackBerry® from Telstra


From: "John Freitag" <jfreitag@thestoneandtileschool.com>
Date: Mon, 21 Sep 2009 10:24:42 -0400
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] Powder polishing crema marfil

Anthony,

 

The problem you may be having with 5X is making sure you have the right 5X powder and you are using it properly. There is a timing and a method for using 5X that I can guarantee will produce the results. The first thing you need is the correct 5Xpowder. This can be purchased from StoneCare Central . Then once you have the powder then you need to know how to use it and how much powder to use per section of floor you are polishing. These process are all taught at The Stone and Tile School.

During our training we will teach you how to polish using 5X on 25 different marbles and a timing process that will tell you exactly how long it takes to hone and polish these stones.

 

If I can be of any assistance please advise

John E. Freitag

President/Director

The Stone and Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

 

From: Anthony Masecchia anthony@777-7797.com [mailto:anthony@777-7797.com]
Sent: Saturday, September 19, 2009 6:22 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Powder polishing crema marfil

 

In my experience all powders work differently for everyone. My competitor works with 5x which I have never been able to get good results from while he loves it. I use the stone medic brand which he dislikes. Use your powder and if you get good results stick with it for most jobs. But always have a few others for when the time comes as it won't work on every stone. Cremo Marfil is an easy one to pop a shine, but that same powder may give you less results on other colors


Sent Antonio Masecchia


On 2009-09-19, at 3:05 PM, Austin Willis <awillis@acjstone.com> wrote:

Hello everyone, I am curious to see what everyone prefers using when powder polishing crema marfil. I have a small 400sq' job that they want me to clean up some etching and restore the polish. I used a small amount of polishing compound from hardrock tools on a small area and it came out amazing while cleaning up the etching. This job could potential turn into a 10Ksq' job so I am hoping to do the best I can. Thank you in advance for any help provided


--
Cheers,

Austin Willis
775.379.2986
www.nevadaconcretepolishing.com
www.acjstone.com
www.concretepolishingmagazine.com
www.floorsconcrete.com


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)