Look really neat.  Any chance that crack is from not having enough support behind it?<br><br><div class="gmail_quote">On Tue, Sep 29, 2009 at 11:49 AM, Baird Standish <span dir="ltr">&lt;<a target="_top" href="mailto:bairdstandish@gmail.com">bairdstandish@gmail.com</a>&gt;</span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div style=""><div><br></div><div>Hi Again,</div><div>Not to overcomplicate an interesting subject.,but thought I would throw in a case study to ponder (see pix below).  Just this morning, I looked at a small outside entry terrazzo step.  It has marble or marble-like aggregate (maybe quartz-not sure).  Much of the aggregate close to the walls and along the channel along the front have been washed away by rain. There are small black marble (or quartz?) mosaic squares set into the center spelling out the address. There are small cracks running through the surface.   My best guess is to really start as low as possible on the grit scale, and use a combination of hand grinders around the edges and a floor machine up to 400, densify at 200, and powder polish.  I would clean first with klenztone.  Thought about using epoxy to fix cracks, but my concern is that they are stress cracks and may reappear.  Am wondering, considering the condition, if Resin diamonds are strong enough or should I go to metals? some of the whiteness no doubt comes from road and sidewalk salt, so I would probably color enhance with enrich n seal or Lithofin color enhancer or similar.  Any comments? Suggestions about metal diamonds?</div>
<div>Thanks,</div><div>Baird</div><font color="#888888"><div><br></div><div><br></div><div></div></font></div><br><div style=""><div></div></div><br><div style=""><div></div></div><br><div style=""></div><br><div style="">
</div><br><div style=""></div><br><div style=""></div><br><div style=""><br><div><div>On Sep 29, 2009, at 10:44 AM, <a target="_top" href="mailto:Polishedrock210@aol.com" target="_blank">Polishedrock210@aol.com</a> wrote:</div><br><blockquote type="cite">

<div style="font-size: 10pt; color: rgb(0, 0, 0); font-family: Arial;"><font size="2" color="#000000" face="Arial">
<div>This is my 1cent on Terrazzo :</div>
<div>Being in Florida ive restored my share of terrazzo,What I have found is 
that although terrazzo looks flat, unless it has been previously 
professionally  restored, it is &quot;quite unflat&quot;: Meaning if I started with 
200 when it was finished the slight depressions ,although smooth and shiny,stand 
out like a sore thumb.</div>
<div>  My best results: come from spending a little extra time on 50 resin, 
this quickly flattens depressions,and cuts through residue sunken in by 50 years 
of stripping and re waxing,after this the remaining grits run fairly fast</div>
<div>   I have restored terrazzo densifying at 200 then running thru 
to 1800, I cant see any difference going the extra step to 3500</div>
<div>  My favorite finish same as 1800 is run thru 400 and powder or 
compound polish and seal with solvent impregnator and buff</div>
<div> either process will produce a finish your customer will 
appreciate</div>
<div>As per my mentor Dr Fred I don&#39;t crystallize anything</div>
<div> As for pricing in Florida I ask average $3.00 per sq ft for terrazzo 
for something over 1000 sq ft,a little less for large commercial, up to $4.00 
for smaller residential areas</div>
<div>  Hope this helps, Good Luck!!  &quot; Big 
Blessings&quot;      Scott    Wilson 
Stoneworks Inc.</div>
<div> </div>
<div>
<div>In a message dated 9/29/2009 12:08:47 A.M. Eastern Daylight Time, 
<a target="_top" href="mailto:bairdstandish@gmail.com" target="_blank">bairdstandish@gmail.com</a> writes:</div>
<blockquote style="border-left: 2px solid blue; padding-left: 5px; margin-left: 5px;"><font style="background-color: transparent;" size="2" color="#000000" face="Arial">
  <div>Just my 2 cents, but I would definitely compare the results going down to 
  50 grit to starting with, say 220. We just polished a 900 sf yellow cementious 
  terrazzo floor (circa 1940 I would guess) and it came out very smooth and 
  glossy with 220, 440 and Mb-12.  I don&#39;t doubt extra low grits, maybe 800 
  grit  and chrystallizer would be a little more refined, but then we were 
  polishing a pet store, not a church and were able to charge 
  appropriately. </div>
  <div>We have also polished many terrazzo floors with twister type pads and 
  they have come out very well. The look is different - more texture - but also 
  very rich and the gloss holds up well after a year +.  Not sure that the 
  twister pad method is significantly less time consuming but more &quot;idiot proof&quot; 
  so to speak. Haven&#39;t really run into epoxy terrazzo.</div>
  <div>B.        <br><br>
  <div>_________________</div>From Baird Standish 
  <div>Managing Partner</div>
  <div>Facility Specialists,LLC</div>
  <div>1616 Walnut Street</div>
  <div>Philadelphia, PA 19103</div>
  <div>Ph: 215-732-7505</div>
  <div>Fx: 215-740-6436</div></div>
  <div><br>On Sep 28, 2009, at 9:19 PM, Georgia Rivera &lt;<a title="mailto:georgia@stonebuff.com" href="mailto:georgia@stonebuff.com" target="_blank">georgia@stonebuff.com</a>&gt; 
  wrote:<br><br></div>
  <div></div>
  <blockquote type="cite">
    <div>I have to find out with Alex what kind of terrazzo I am dealing 
    with.  I don&#39;t know what to look for to tell what type it is.  
    <br><br>
    <div class="gmail_quote">On Mon, Sep 28, 2009 at 8:26 PM, John Freitag <span dir="ltr">&lt;<a title="mailto:jfreitag@thestoneandtileschool.com" href="mailto:jfreitag@thestoneandtileschool.com" target="_blank"></a><a title="mailto:jfreitag@thestoneandtileschool.com" href="mailto:jfreitag@thestoneandtileschool.com" target="_blank">jfreitag@thestoneandtileschool.com</a>&gt;</span> 
    wrote:<br>
    <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
      <div link="blue" vlink="purple" lang="EN-US">
      <div>
      <div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Georgia, 
      </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">I tested the 
      crystallizer about 10 days ago and gave Chad the ok it worked very 
      good.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Regarding the 
      pricing question are you asking for a price on the terrazzo ? if so how 
      many hone are you going to do? are you going to use a  demystified ? 
      are you going to crystallize?</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Remember in 
      training we build the bid based upon the cost of materials and labor and 
      then applied the profit margin. If you need help call me and we will work 
      through the cost tomorrow </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Be sure to be 
      ready to answer the above questions, so we can build the costs and add the 
      profit margins to the job.</span></p></div><p><span style="font-size: 14pt; color: rgb(31, 73, 125); font-family: &#39;Cataneo BT&#39;;">John 
      E. Freitag </span></p>
      <div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">President/Director</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">The Stone and Tile 
      School</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Office 
      407-567-7652</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Cell 
      407-615-0134</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a title="http://jfreitag@thestoneandtileschool.com/" href="http://jfreitag@thestoneandtileschool.com/" target="_blank"><span style="color: blue;">jfreitag@thestoneandtileschool.com</span></a></span></p>
<div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">&lt;image002.jpg&gt;</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br>
</div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a title="http://www.thestoneandtileschool.com/" href="http://www.thestoneandtileschool.com/" target="_blank"><span style="color: blue;">www.thestoneandtileschool.com</span></a></span></p>
<div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br>
</div></div>
      <div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;"><p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a title="http://rivera.gm/" href="http://rivera.gm/" target="_blank">rivera.gm</a>@<a title="http://gmail.com/" href="http://gmail.com/" target="_blank"></a><a title="http://gmail.com/" href="http://gmail.com/" target="_blank">gmail.com</a> 
      [mailto:<a title="mailto:rivera.gm@gmail.com" href="mailto:rivera.gm@gmail.com" target="_blank"></a><a title="mailto:rivera.gm@gmail.com" href="mailto:rivera.gm@gmail.com" target="_blank">rivera.gm@gmail.com</a>] <b>On 
      Behalf Of </b>Georgia Rivera<br><b>Sent:</b> Monday, September 28, 2009 
      6:49 PM</span></p>
      <div>
      <div></div>
      <div><br><b>To:</b> Restoration and 
      Maintenance<br><b>Subject:</b> RE: [sccpartners] Terrazzo 
      Question</div></div><div><br></div></div>
      <div>
      <div></div>
      <div><div> <br></div><p style="margin-bottom: 12pt;">Thank you all!  You guys are so 
      great!  Do you know if that crystallizer is ready for purchase from 
      Stonecare Central, yet?  Also, what would you suggest a normal per sq 
      ft charge should be?</p>
      <div><p>On Mon, Sep 28, 2009 at 11:40 AM, John Freitag &lt;<a title="mailto:jfreitag@thestoneandtileschool.com" href="mailto:jfreitag@thestoneandtileschool.com" target="_blank"></a><a title="mailto:jfreitag@thestoneandtileschool.com" href="mailto:jfreitag@thestoneandtileschool.com" target="_blank">jfreitag@thestoneandtileschool.com</a>&gt; 
      wrote:</p>
      <div>
      <div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Georgia,</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">I’ll give you my 2 
      cents worth on terrazzo. Over the past I’ve worked on both cement based 
      and epoxy based terrazzo. As mentioned by one of the other partner treat 
      it like marble. However there are several thing to consider when doing 
      terrazzo. </span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">1.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">If the 
      terrazzo has been coated? waxed you first need to strip it. Then start 
      with at least a 50 grit resin diamond, then progress through the grits 
      until you have reached the desired hone, if it a dark colored terrazzo , 
      then hone up to 800 , if it’s a light color terrazzo hone to a 400 
      </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">2.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">I recommend on 
      cement based terrazzo to use a densiflier, the process I use is to hone 
      the terrazzo up to a 220 grit then apply the densiflier keeping it wet for 
      at least 45 minutes, then vac up the excess. By leaving the densiflier on 
      the terrazzo for 45 minutes you are allowing the densiflier to penetrate 
      into the cement.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">3.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">After you have 
      vac up the excess densiflier then take a finish mop for applying waxws and 
      lightly mop on a thin coat of the densfilier, let this dry over night and 
      then come back and do the 400 , 800 hone until you reach the gloss you are 
      looking for. by mopping on a  coat of the densiflier and leaving it 
      overnight this give the cement a harder finish and will polish easier and 
      deliver a high gloss finish.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">4.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">There is no 
      need to use polishing powders if you are using a densifiler.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">5.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">If you want 
      more color on the terrazzo you could use a very light application of 
      crystallization. This would add gloss and some additional color to the 
      terrazzo. And don’t fear the Terrazzo Institute recognizes crystallization 
      as an acceptable method of polishing terrazzo. </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">EPOXY TERRAZZO 
      </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">1.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">If the 
      terrazzo  is epoxy you will need to strip off any coating that have 
      been applied.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">2.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">You normally 
      need to start honing at a 50 resin and hone up to the grit to where you 
      can polish the terrazzo.  Usually on dark colors you need to go up to 
      at least 800, lighter colors you can polish after 400 </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">3.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">Polishing you 
      can use a 5X  Powder </span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">4.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">If you desire 
      a higher shine and additional color you can do a light application of 
      crystallizer.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">5.</span><span style="font-size: 7pt; color: rgb(31, 73, 125);">       
      </span><span style="font-size: 11pt; color: rgb(31, 73, 125);">Diamond to use 
      I always used my regular marble diamonds on both cement and epoxy 
      terrazzo,  I per the 3 inch triple thick from StoneCare 
      Central.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Georgia, as you 
      learned in your recent training use the same timing methods as you do for 
      marble and you will be fine. Plus this will allow you to project out the 
      time needed to complete the project. If you have any questions , please 
      call </span></p><p><span style="font-size: 14pt; color: rgb(31, 73, 125); font-family: &#39;Cataneo BT&#39;;">John 
      E. Freitag </span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">President/Director</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">The Stone and Tile 
      School</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Office 
      407-567-7652</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Cell 
      407-615-0134</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a title="http://jfreitag@thestoneandtileschool.com/" href="http://jfreitag@thestoneandtileschool.com/" target="_blank"></a><a title="mailto:jfreitag@thestoneandtileschool.com" href="mailto:jfreitag@thestoneandtileschool.com" target="_blank">jfreitag@thestoneandtileschool.com</a></span></p>
<div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">&lt;image001.jpg&gt;</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br>
</div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a title="http://www.thestoneandtileschool.com/" href="http://www.thestoneandtileschool.com/" target="_blank"></a><a title="http://www.thestoneandtileschool.com/" href="http://www.thestoneandtileschool.com/" target="_blank">www.thestoneandtileschool.com</a></span></p>
<div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br>
</div><div><span style="font-size: 11pt; color: rgb(31, 73, 125);">   </span><br></div><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div>
      <div style="border-style: solid none none; border-color: -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;"><p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a title="mailto:fhueston@gmail.com" href="mailto:fhueston@gmail.com" target="_blank"></a><a title="mailto:fhueston@gmail.com" href="mailto:fhueston@gmail.com" target="_blank">fhueston@gmail.com</a> [mailto:<a title="mailto:fhueston@gmail.com" href="mailto:fhueston@gmail.com" target="_blank"></a><a title="mailto:fhueston@gmail.com" href="mailto:fhueston@gmail.com" target="_blank">fhueston@gmail.com</a>] <b>On Behalf 
      Of </b>Dr Fred<br><b>Sent:</b> Sunday, September 27, 2009 7:40 
      AM</span></p>
      <div>
      <div><p><span style="font-size: 10pt;"><br><b>To:</b> Restoration and 
      Maintenance<br><b>Subject:</b> RE: [sccpartners] Terrazzo 
      Question</span></p></div></div></div>
      <div>
      <div><div> <br></div><p style="margin-bottom: 12pt;">Jason is correct you need to determine if 
      it is epoxy or Portland based terrazzo. If you see cracking in the 
      terrazzo chances are it is Portland based.  Denisfiers can not be 
      used on epoxy..For Portland terrazzo use standard marble pads. for epoxy 
      use one designed for Engineered stone such as the Ceramica EX by Alpha</p>
      <div><p>On Sat, Sep 26, 2009 at 10:21 PM, Randy Frye &lt;<a title="mailto:rfrye@comcast.net" href="mailto:rfrye@comcast.net" target="_blank"></a><a title="mailto:rfrye@comcast.net" href="mailto:rfrye@comcast.net" target="_blank">rfrye@comcast.net</a>&gt; wrote:</p>

      <div>
      <div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Hi 
      Georgia:</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">We do a lot of the 
      old terrazzo in Florida. We treat it just like marble floors. I will 
      usually polish with a marble polishing compound after a 400 resin. I start 
      with whatever the stone dictates as far as scratching is concerned or 
      glues on surface from carpet, ect. This picture was one we did last week 
      in Marco Island Florida.</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Hope this 
      helps</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Randy, Cleaning 
      Edge</span></p><p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Naples, 
      FL</span></p><div><span style="font-size: 11pt; color: rgb(31, 73, 125);"></span> <br></div>
      <div>
      <div style="border-style: solid none none; border-color: -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;"><p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> Jason Francis [mailto:<a title="mailto:jfrancis@protocolfloorcare.com" href="mailto:jfrancis@protocolfloorcare.com" target="_blank"></a><a title="mailto:jfrancis@protocolfloorcare.com" href="mailto:jfrancis@protocolfloorcare.com" target="_blank">jfrancis@protocolfloorcare.com</a>] 
      <br><b>Sent:</b> Saturday, September 26, 2009 9:30 PM<br><b>To:</b> 
      Restoration and Maintenance<br><b>Subject:</b> RE: [sccpartners] Terrazzo 
      Question</span></p></div></div>
      <div><div> <br></div>
      <div><p>Hi Georgia, </p></div>
      <div><p>Its good to know if the binder is concrete or epoxy. Use harder resins 
      for terrazzo. I usually start at 220 metal or 50 resin if it&#39;s in decent 
      shape. If it&#39;s concrete, you can densify after 400, and work your way up, 
      or you can use a powder polish and get a nice shine as well at 800 or 
      above. Sometimes it&#39;s good to use a concrete densifyer/coating as a 
      topical.</p></div>
      <div><div> <br></div></div>
      <div><p>Jason</p></div>
      <div><div> <br></div></div>
      <div><p>Protocol   <br><br>Sent from my iPhone</p></div>
      <div><p style="margin-bottom: 12pt;"><br>On Sep 26, 2009, at 8:25 PM, Georgia 
      Rivera &lt;<a title="mailto:georgia@stonebuff.com" href="mailto:georgia@stonebuff.com" target="_blank"></a><a title="mailto:georgia@stonebuff.com" href="mailto:georgia@stonebuff.com" target="_blank">georgia@stonebuff.com</a>&gt; 
      wrote:</p></div>
      <blockquote style="margin-top: 5pt; margin-bottom: 5pt;">
        <div><p>Hi Partners,<br><br>I haven&#39;t done much terrazzo estimates as I don&#39;t 
        see very much of it where I am.  I have a steakhouse that has a 
        matt finish terrazzo (most of it is dark with light accent pieces on the 
        borders).  Approx. 2500 sq ft.  I took my razor and didn&#39;t 
        find a topical.  The owner wants the light scratches removed and 
        wants the finish to have a  high gloss.  Nice place with a 
        black baby grand piano in a fun area just a few blocks from 
        downtown.  From what I know, there are special pads for terrazzo, 
        is that right.  The building was built in 1999.  I do not know 
        the age of the floor.<br><br>I was thinking of a deep clean, diamond 
        hone process then crystallizer.  Does anybody else have anything 
        they can add to help me with estimating the project?<br><br>Thanks 
        all!<br><br>Georgia</p>
        <div style="text-align: center;" align="center">
        <hr size="2" width="100%" align="center">
        </div><p>Powered by <a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
        subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
        conversation (thread)</a> </p></div></blockquote>
      <div style="text-align: center;" align="center">
      <hr size="2" width="100%" align="center">
      </div><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
      subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
      conversation (thread)</a> </p></div></div>
      <div>
      <div style="text-align: center;" align="center">
      <hr size="2" width="100%" align="center">
      </div><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
      subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
      conversation (thread)</a> </p></div></div></div><p><br><br clear="all"></p><p style="margin-bottom: 12pt;"><br>-- <br>Frederick M. Hueston PhD<br><a title="http://www.stoneforensics.com/" href="http://www.stoneforensics.com/" target="_blank"></a><a title="http://www.stoneforensics.com/" href="http://www.stoneforensics.com/" target="_blank">www.stoneforensics.com</a><br>
<a title="http://www.stoneandtilepros.com/" href="http://www.stoneandtilepros.com/" target="_blank"></a><a title="http://www.stoneandtilepros.com/" href="http://www.stoneandtilepros.com/" target="_blank">www.stoneandtilepros.com</a><br>
My 
      New Radio Show  <a title="http://www.thestoneandtileshow.com/" href="http://www.thestoneandtileshow.com/" target="_blank"></a><a title="http://www.thestoneandtileshow.com/" href="http://www.thestoneandtileshow.com/" target="_blank">www.thestoneandtileshow.com</a><br>
Become 
      a Stone and Tile Inspector..sign up for our next class in October 2009 
      (only one class per year is offered) <a title="http://www.thestoneandtileschool.com/" href="http://www.thestoneandtileschool.com/" target="_blank"></a><a title="http://www.thestoneandtileschool.com/" href="http://www.thestoneandtileschool.com/" target="_blank">www.thestoneandtileschool.com</a><br>
888-314-9077<br>702-314-1017</p>
      <div style="text-align: center;" align="center">
      <hr size="2" width="100%" align="center">
      </div><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
      subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
      conversation (thread)</a> </p></div></div></div>
      <div>
      <div>
      <div style="text-align: center;" align="center">
      <hr size="2" width="100%" align="center">
      </div><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
      subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
      conversation (thread)</a> </p></div></div></div></div><div> <br></div>
      <div style="text-align: center;" align="center">
      <hr size="2" width="100%" align="center">
      </div><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
      subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
      conversation (thread)</a> </p></div></div></div>
      <div>
      <div></div>
      <div>
      <hr><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit list archives, subscribe, unsubscribe or change your 
      subscription preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new 
      conversation (thread)</a> </p></div></div></div></blockquote></div><br>
    <hr><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank"></a><a title="http://discussthis.com/" href="http://discussthis.com/" target="_blank">http://DiscussThis.com</a> <br>
<a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit 
    list archives, subscribe, unsubscribe or change your subscription 
    preferences </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new conversation 
    (thread)</a> </p></div></blockquote>
  <hr><p>Powered by <a title="http://www.discussthis.com/" href="http://www.discussthis.com/" target="_blank">http://DiscussThis.com</a> <br><a title="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">Visit 
  list archives, subscribe, unsubscribe or change your subscription preferences 
  </a><br><a title="mailto:sccpartners@stoneandtilepros.com" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new conversation 
  (thread)</a> </p>=</font></blockquote></div></font><hr><p>Powered by <a target="_top" href="http://www.discussthis.com/" target="_blank">http://DiscussThis.com</a>
<br><a target="_top" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">
Visit list archives, subscribe, unsubscribe or change your subscription preferences
</a>
<br>
<a target="_top" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new conversation (thread)</a>
</p>
</div>
</blockquote></div><br><hr>
<p>Powered by <a target="_top" href="http://www.discussthis.com" target="_blank">http://DiscussThis.com</a>
<br><a target="_top" href="http://www.discussthis.com/members/sccpartners@stoneandtilepros.com" target="_blank">
Visit list archives, subscribe, unsubscribe or change your subscription preferences
</a>
<br>
<a target="_top" href="mailto:sccpartners@stoneandtilepros.com" target="_blank">Start a new conversation (thread)</a>
</p>
</div><br></blockquote></div><br>