Don,
I seem the product Nino is referring to. I highly
recommend you do a test for the customer. Keep in mind that all slip
resist products do change the appearance of the tiles. These products are acid
based so normal precaution are to be taken when using these product.
If these products are used on marble they will slightly etch the
stone.
The only other slip resist product are coating that i8 do not
recommend.
Also when using these products the customer m=needs to know they
must keep the surface clean. If the surface is not kept clean the pores in the
tiles will collect dirt etc. and become slippery again. Usually with any slip
resist product I recommend a cleaning maintenance program. The frequency of the
maintenance program will depend upon the location of the tiles.
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: Troy Lewis
[mailto:tlewis@stoneandtilepros.com]
Sent: Monday, December 14, 2009 10:29 AM
To: Restoration and Maintenance
Subject: [sccpartners] Non Slip Chemicals
I have seen some products
that are supposed to create a high coefficient of friction on tiles, which
reduces the chances of slips and falls. They do this by dissolving small
amounts of silica on the surface.
Are they safe to use? Will
they create long term damage?
Don
Powered by http://DiscussThis.com
Visit
list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation
(thread)