Hi Walter.  What grit sandpaper should I use?  Also, can I use marble polishing compound?
B

On Fri, Feb 26, 2010 at 5:07 PM, Walter Nartowicz <walter@midatlanticstonesolutions.com> wrote:
It's pretty easy. You need an orbital sander to take the scratches out. Go light because they come out fairly easy. Then take a hand grinder with rubbing compound or polishing compound and bingo it's done. One thing about the orbital grinder, don't go to high in the sanding process because it has a tendency to get "squiggly" marks that you'll have to get out. It's really not that hard. Do it dry not wet. Hope this helps.


On Fri, Feb 26, 2010 at 4:22 PM, Baird Standish <bairdstandish@gmail.com> wrote:
Hi,
I received a request from a client about taking scratches out of a corian counter.  Is this possible?  Does anyone have experience with this?
B

--
________________________________________
>From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
Walter Nartowicz
Mid Atlantic Stone Solutions
www.midatlanticstonesolutions.com
4607 Fayetteville Road
Raleigh, NC 27603
919-772-2155 (Main Office)



--
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160