If it is crystalized you might have a hard time breaking thru the surface crust with 220 resins.

Sent via BlackBerry® from Telstra

From: Info Info <info@restoreyourtiles.com>
Date: Wed, 14 Apr 2010 22:26:00 -0500
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] Crystallized

Roger,
Did customer tell you that it was crystallized or there are signs somewhere that tells it was. Just curious.
 
If there are no big scratches I would start with 220 for 4 minutes and then go to 120 if necessary.

On Wed, Apr 14, 2010 at 10:05 PM, Roger Konarski <qm144@yahoo.com> wrote:

If a floor is crystallized, must it be leveled 1st to be restored.  I’m looking at a job that was crystallized last time it was restored. See the attached picture. My thoughts are that the tiles are oversized. Looking at the floor the tiles are pretty worn and really do not show signs of being crystallized. My thoughts are to start with 120 under white pad, if needed to go lower. Would appreciate any advice.

Thanks,

Roger Konarski

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)