Greg,
How many applications of sealer are you using?
Are you using a water based sealer or a solvent based sealer?
If you have applied several coats of sealer and used a solvent
based sealer then you have done just about all you can do.
I’m sure the minerals in the water is going to effect the
water spotting. The water in their California home is not the same as their
home in Maui
StoneCare Central is coming out with a new and improved Soap and
Film Remover you customer can use and this should remove the water spots with
no problem. Look for this new product in the next several weeks
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: info
@surfacesolutions.com [mailto:info@surfaceshawaii.com]
Sent: Friday, May 14, 2010 1:44 PM
To: Restoration and Maintenance
Subject: [sccpartners] Marble Shower
I have a customer in Maui that is complaining about water
stains on the floor of her highly polished marble shower. They have a water
softener installed, and the company that installed it, tested the water and
says that the water is fine. We polished out the mineral buildup and sealed the
stone and grout with Limestone & Mable Protector and after about a weeks
use, they have heavy duty water deposits on the floor again. They seem to think
that we are not using a good impregnator because the spots should be easier to
clean off. I explained to them that impregnators keep the stains on the surface
but will not do anything about the minerals in the water that are being left
behind.
They claim that they have the same marble shower in their home in California, without
a water softener and do not have this problem.
Is there a way to prevent the minerals from bonding so well to the polished
marble floor? Do you know of a product that will remove these deposits with out
harming the polished finish?
Thanks
Greg Cook
surfaceshawaii.com
Powered by http://DiscussThis.com
Visit
list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation
(thread)