Do you know what the old sconce was made of? Whatever the sconce was coated with may have leached onto the stone that it covered. That answer may lead to the appropriate poultice or, maybe a sample cleaning. Good luck
Thanks john, but i just want to make sure i explained it well in my email. The dark area is what was covered by the old fixtures for all that time. Now they changed the fixtures and that is what is now showing. They even thought that the dark area may have been the original color. But it doesnt seem logical that the rest of the stone would all lighten uniformly except what was covered by the sconce.
Sent from my Verizon Wireless BlackBerry
--
-----Original Message-----
From: "John Freitag" <jfreitag@thestoneandtileschool.com>
Date: Fri, 20 Aug 2010 08:20:02
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
Reply-To:"Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] wall in building entrance
Lorne,
The dark color looks like it might caused by the polishing of the metal, if
the metal has been polished in the past. I see the darken of stone when
janitorial companies polish the stainless that is next to the stone the oils
from the metal polishes over time go into the stone.
Try cleaning with an alkaline based cleaner, you will probably need to make
a poultice and apply to the stone. the poultice can be made with an alkaline
based cleaner or for oil stains I prefer mineral sprit mixed with the
poultice powders.
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
www.thestoneandtileschool.com
-----Original Message-----
From: Lorne Greenberg [mailto:lorne@fabracleenstoneandtilecare.com]
Sent: Thursday, August 19, 2010 9:14 PM
To: Restoration and Maintenance
Subject: [sccpartners] wall in building entrance
Hey guys, in the picture you can see the darker area around the sconce. It
is not a shadow, they recently changed the sconce and this is what was under
it, it's not just dirt and I'm not positive that honing and polishing would
definitely make it lighter and match. There are 3 of these on the wall.
Has anyone seen anything like this before? The walls are highly polished,
and the other pieces were up for a few decades at least. This is in
Manhattan if that makes any difference, if this has to do with our clean
air. Please let me know any ideas or suggestions. Thanks.
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com