I am interested in this slip fall program.
Kris

On 10/8/2010 8:53 AM, Fred Hueston wrote:
The terrazzo should not be slippery...however,  you have to remember that anything spilled on the floor might cause it to be slippery..I have designed a slip fall program if your interested.
it includes a written program
accident reports etc

On Fri, Oct 8, 2010 at 9:30 AM, Baird Standish <bairdstandish@gmail.com> wrote:
John,
the surface is terrazzo.  the floor was poured about 6 years ago.  They then coated it with a thick layer of something that the contractor said would last 6 years.  They didn't like the results and put 4 coats of acrylic on it which just made it worse. We are proposing a polished finish. In our test we we first stripped off the coating (fairly easily).   What was left was a smooth finish of probably 100 grit.  We honed at 200, 400 and 800 and then polished with 5x.  At 800 we could get both the aggregate and cement to a suitable clarity and gloss.  400 only got the aggregate glossy.  We touched it off with some chrystallizer. See picture below.
The owners are concerned about slipperiness.  I don't believe that the tested floor is particularly slippery but they are looking for any recommendations just the same.  They are also looking for fewer maintenance headaches than they had with the coating.
Thanks.
Baird
Terrazzo.jpg 

On Wed, Oct 6, 2010 at 4:51 PM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:

Baird,

 

What are you trying to apply the anti slip to?  Marble, granite, ceramic tile there are different anti slip materials out there it depends upon the surface  you are working on.

 

 

John E. Freitag

President/Director

The Stone and Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

 

From: Baird Standish [mailto:bairdstandish@gmail.com]
Sent: Tuesday, October 05, 2010 2:39 PM
To: Restoration and Maintenance


Subject: [sccpartners] Anti-Slip Treatments

 

Hi,

Was wondering if anyone out there has come across an effective anti-slip treatment for polished floors. A friend of mine told me about a treatment that employs some sort of micro-etching or something along these lines that does not require a coating.  I often get asked about this sort of thing and I can typically only recommend a coating of polymer, which I don't particularly like.

Thanks,

Baird

--
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products  http://www.stonecarecentral.com/?Click=2149

Many of my informational articles can be found at www.thestonedude.blogspot.com
Listen to my radio show at www.blogtalkradio.com/drfred
The Ultimate Stain Remover  www.GoDrFred.com

888-314-9077
702-314-1017
Cell 321-514-6845


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


-- 
Marble Floors And More
Kris Dougherty
3304 N Lindbergh Blvd.
Saint Ann, MO 63074
Cell - 314.503.3062
Fax - 314.298.1227