Baird,

What is the specific humidity or grains in the area where the floor is and what are the grains in the basement and outside?

J
From: Baird Standish <bairdstandish@gmail.com>
Date: Tue, 12 Oct 2010 15:06:40 -0400
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
ReplyTo: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] Terra Cotta floor

There is no doubt about that.  We are now running dehumidifiers around the clock.
b

On Tue, Oct 12, 2010 at 3:02 PM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:

Baird,

 

Have you checked the moisture levels in the material. It looks to me like this may be moisture in the material causing the problem.

 

 

John E. Freitag

President/Director

The Stone and Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

 

From: Baird Standish [mailto:bairdstandish@gmail.com]
Sent: Tuesday, October 12, 2010 1:45 PM
To: Restoration and Maintenance


Subject: [sccpartners] Terra Cotta floor

 

Hi,

We are working on a Terra Cotta floor that has a few problems and was looking for a few pointers.  This is, more of a European terra cotta than a mexican saltillo.  We do a fair amount of these every year and typically don' t have that many problems.  As with others, we stripped with Aldon gel stripper which rendered the floor completely free of any coating (it was originally waxed).  We typically apply mexiglaze and build up the layers, and use different types of applicators depending upon the situation.   This time we principally uses a microfiber pad.

The problem is that we are getting a lot more streaking than normal.  I think the problem relates to a flash storm on Wednesday and excessive humidity including a flood in the basement that we found out about on Saturday after applying three coats. My analysis is that the humidity was not letting the coats dry sufficiently and each application was pulling on the one below.  

What I would like to do if possible is remove much of the streaking and continue coating so that the streaking disappears.  I applied a heavy coat yesterday slowly with a finish mop and will check in tomorrow.  It looked better but I could still see evidence of pulling.  We will final coat it with Lifeguard/polymer.  I was going to try a lambs wool applicator tomorrow for my next test.   Wondering if using an orbiter/sanding screens/etc, or perhaps light spot stripping might help even out the floor in spots. We shouldn't have been in such a hurry but the owners were pushing us so that a weekend house tour would happen.  Have been to the Aldon website but not much help.  See pic below.  Thanks.

Baird

Saltillo Photo.jpg


--
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)