John: since 1996 when we bought our first marble machines,because of the ease and reliability of a flat ground ,resin honed and polished finish, I have never had the opportunity to hone with powders, it was never a requirement for me.Look i dont want to waste your time, I have to assume on a job like this it would have to cost at minimum .50 per sq ft per step, if we started 50 honing powder, that's 6 steps to finish at least 3 bux a ft, plus travel. Job is near Ocala, but 3 a sq ft for them is out of their budget, would you be interested in a fair split where i bring my body and equiptment,compensate you fairly for experence? how quickly compaired to diamonds do powders work,what would be an approximate cost per ft for the powders?

 

Scott,

 

if the lippage is bad you could actually hone the floor using honing powders. Them come in grits as low as 50, it wouldn’t remove the lippage but would remove most of the scratches except for those real deep one. Then hone the floors with powders up to 800 then polish with 5X.  this would differently help the floor appearance

where the job located if you don’t want it I would be interested in it for my service company. If you are not going to take it

 

 

John E. Freitag

President/Director

The Stone and Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

 

www.thestoneandtileschool.com

 

 

 

From: Polishedrock210@aol.com [mailto:Polishedrock210@aol.com]
Sent: Monday, December 13, 2010 4:42 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] green agglomerate

 

sorry i did not take pictures, they dont want to pay me to grind and do this right, the job might only be about an hour away from you, if you are interested ill set you up with the right gal,or any ideas would be appreciated, thanks John;    Scott Wilson

 

In a message dated 12/13/2010 4:21:55 P.M. Eastern Standard Time, jfreitag@thestoneandtileschool.com writes:

Scott.

Can you send pictures ??

Perhaps I can give you some ideas on how to hone and polish this stone.  

 

 

John E. Freitag

President/Director

The Stone and Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

 

www.thestoneandtileschool.com

 

 

 

From: Polishedrock210@aol.com [mailto:Polishedrock210@aol.com]
Sent: Monday, December 13, 2010 3:48 PM
To: Restoration and Maintenance
Subject: [sccpartners] green agglomerate

 

I hope someone may have some experence with this material, A city hall in central florida has about 1400 sq ft of this dark green bordered by a lighter "crema marfil" type light border, It was poorly installed with extensive lippage on every stone, its shows extensive wear, with some deep scratches where someone drug heavy fruniture. the city cannot give me a week to grind lippage, nor do i want to take metal discs for extensive lippage removal , nor do i want to spend nights for the next 5 weeks with 50 resins,and the city will not spring for full restoration.I normaly do not do maintance type work , mostly full restoration, any sugestions beyond a deep clean and severalcoats of a "floor shine hardner" like Stampede Gold buffed then regular maintance. This man made green stone scares me to death, any help appreciated.

Scott  ;  Wilson Stoneworks Inc

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

=

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

=