your next step would be to check it for salts. If you remember in class I showed you how to test for the presences of salts using a moisture meter and filter paper. The procedure is also on the blog at stp site. Test it for salts and your next step would be to eliminate the salts if possible. Keep in mind that if this is a moisture issue due to environmental issues replacement may be the only alternative, but this time a different setting method may be necessary.
RogerPitting and spalling can be caused by basically two things..The crystallization of soluble salts and/or extreme heat. I would first look to see how the granite is set. If it is set in a mortar that is getting wet it can be caused by salts in the setting bed. I would also look at external salt sources. ie, cleaners, deicing salts, etc.On Sun, Jan 9, 2011 at 1:43 PM, Roger Konarski <qm144@yahoo.com> wrote:
I would appreciate help on this problem. See attached pictures. New installation of outdoor granite. They are having problems with the stone pitting in certain areas. What is causing this and what if anything can be done to prevent this from continuing? Thanks in advance for your help!
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products http://www.stonecarecentral.com/?Click=2149
Many of my informational articles can be found at www.stoneandtilepros.com
Listen to my radio show at www.blogtalkradio.com/drfredThe Ultimate Stain Remover www.GoDrFred.comCell 321-514-6845