As most of you know, resin slabs are here to stay and so are the problems that can occur. One such issue is the edge profile becomes lighter than the top. The reason for this is due to the fact that UV light darkens the surface. The edge is newly exposed and it will in time turn dark. However in order to make it match you will need to use a color enhancer using the following procedure.
1. Open the edge profile up with a 120 grit
2. Continue to a 400 grit
3. Dry the edge and apply several coats of a good quality color enhancer and allow it to soak it for 30 minutes
4. Continue with the remaining grits till the edge is polished
5. Apply one additional coat of enhancer
I'll have an article up in the resource directory soon about this entire process or you can go to
thestonedude.blogspot.comDr. Fred