Roger,
I would suggest using Oxi-Clean .mix up the product on the stronger side and mop on your floor allow the oxi-clean to dwell into the stone then go on the floor with your floor machine and scrub ,then vac this process works well.
Also if you have the pressure cleaning systems with the rotary head those work well also. I always tell my customer I cannot guarantee the pin hole will clean up totally. I do not recommend trying to fill them this is only a temporary fix and will come back to haunt you.
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: Roger Konarski [mailto:qm144@yahoo.com]
Sent: Sunday, February 27, 2011 8:11 PM
To: Restoration and Maintenance
Subject: [sccpartners] Pin Holes
On a floor that I just cleaned, I was unable to remove the dirt in deep pin holes. The floor was Limestone. I was thinking about floating a color match grout over the problem areas. Would appreciate any feed back or suggestions. Unfortunately I’m unable to attach pictures, they keep getting rejected by the system, I assume the file is too large.
Thanks,
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
