Treat it like granite..take it to as high a hone as possible.--
On Fri, Mar 18, 2011 at 3:50 PM, Walter Nartowicz <email@example.com> wrote:
Skip the sealer it's a waste of time. It's hard to see the glass chips in the pictures but I did a Disney Store years ago that was terrazzo with large glass chips and it was trial and error. Try bringing it up to an 800-1500 grit and using crystallizer with white granite polishing powder and that should make it "pop". Densifiers and impregnators wont do anything at all because the epoxy and glass chips have a great chemical resistance and wont react or accept either. About the wax, who the eff knows what ostrich with his head in the sand still recommends it, maybe he thinks it's 1911 instead of 2011.
On Fri, Mar 18, 2011 at 12:54 PM, Jason Francis <firstname.lastname@example.org> wrote:
I need some suggestions on this epoxy terrazzo floor with glass aggregate. It needs the wax stripped, and then I was thinking of running diamonds to 800. I would think next to use a honing powder, as polishing glass and/or densifying would do nothing. Any thoughts or suggestions?
Could you see just using a honing powder and an impregnating sealer?
As a side point, I find it interesting that the NTMA still lists on their site the proper maintenance for all terrazzo is waxing. It lists diamond restoration benefits as being unknown. What’s up with that?
Sales/ Lead Stone Pro
333 Norton Road
Red Hook, NY 12571
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Mid Atlantic Stone Solutions
4607 Fayetteville Road
Raleigh, NC 27603
919-772-2155 (Main Office)
Frederick M. Hueston PhD
Recommended stone care products http://www.stonecarecentral.com
Many of my informational articles can be found at www.stoneandtilepros.com
Listen to my radio show at www.blogtalkradio.com/drfredThe Ultimate Stain Remover www.GoDrFred.com