On Mon, Oct 27, 2008 at 11:51 AM, Tony StoneBrite <tony@stonebritechicago.com> wrote:

Thanks, Would you use a water based sealer or solvent?

Have A Great Day

Tony DiBartolo

--- On Sat, 10/25/08, Randy Frye <rfrye@comcast.net> wrote:

From: Randy Frye <rfrye@comcast.net>
Subject: RE: [sccpartners] Onyx
To: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Date: Saturday, October 25, 2008, 4:47 PM

Tony

Get the proper color of unsanded grout for after the clean.

If they just want a cleaning, I would.

1.       Vacuum the floor.
2.       Machine scrub it with a neutral cleaner and a white pad, then extract well.
3.       Do the grout repair, let the stone dry a day or so, and the new grout can firm up.
4.       Return after the stone dries to seal it.

Good Luck

Randy, Cleaning Edge

From: Tony StoneBrite [mailto:tony@stonebritechicago.com]
Sent: Saturday, October 25, 2008 1:16 PM
To: Restoration and Maintenance
Subject: [sccpartners] Onyx

Good Morning all, I have a polished honey onyx job about 300sq. ft. 12x12 tiles on the floor. The floor is actually in great shape installed 10 years ago.I have to repair a little grout. He wants it cleaned,buffed and sealed. What is the easiest way to do this?Again it is in great shape,hard to beleive but it is.I never dealt with onyx before.

Thanks Tony   StoneBrite Chicago

Have A Great Day

Tony DiBartolo

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)