Austin,
Fred is right- Rainforest brown is a hard stone to work with. Even taking this stone up high with diamonds you will seem to get an irregular finish.
Definitely finish with a granite polishing compound. I am sure there are several that will do the trick.
I dont want to sound biased or out of line so I will leave it at that. I attached some pics someone sent me of rainforest green. I think the brown is harder but you can deliver a good finish.
We do a lot of travertine-If we are grinding the stone and finishing with a honed surface we use grout mixed with latex filling after 120 grit. We wait a day or so and remove using 120 resins or and or excalibers. Then finish with diamonds and honing powders. Same for polished floors as polyester can be tough to work with.
If the floor isnt flat it is harder to remove the cured fill material.
 If the customer only wants the floor cleaned and honed we use either a latex modified grout or add a small amount of latex into the color of their choice. After we Finish the floor we use the grout and fill everything by hand and remove all signs of residue. We explain to them the differences in techniques. Today we find many customers do not want to pay for grinding travertine.
When it is an older floor they want the soil cleaned out,the surface refinished mostly honed sometimes polished and all the degraded or open fill in and around the traffic areas refilled. So we use a high pressure extractor,chemicals,diamonds,abrasive pads like the norton coarse and honing powders to get it done at a fair price. We would much rather grind them flat however.
 

On Sat, Mar 26, 2011 at 6:45 AM, Fred Hueston <fhueston@gmail.com> wrote:
Yes that is Rainforest brown and it is not a grainte.   it can be tricky to get a good polish on it. Try taking it to a high hone and try granite polish instead of marble polish..
\
as far as fill for the travertine use Traverfill.


On Fri, Mar 25, 2011 at 9:11 PM, <flooramor@aim.com> wrote:
That looks like Rainforest Brown on my dinky screen.

If so, it is brittle and may orange peel easily. I would hone to my highest diamonds and polish with granite powder or a cold polishing powder.

J

Sent from my BlackBerry® smartphone with Nextel Direct Connect


From: Austin Willis <awillis@acjstone.com>
Date: Fri, 25 Mar 2011 17:29:09 -0700
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
ReplyTo: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Subject: [sccpartners] Stone identification

Hello Everyone,  I have a customer who has a "Granite" counter that she needs cleaned and sealed. I dont think that the stone is a granite but I attached a photo.  What would be the best way to polish it or clean it?  

She also has Travertine floors which need a ton of filing and needs to be re finished to the original finish.  What do you like to use to fill lots of holes in travertine? And what is the easiest way?   Thank you in advance for any help provided. 

--
Cheers,

Austin Willis
775.379.2986



--
Cheers,

Austin Willis
775.379.2986
www.nevadaconcretepolishing.com
http://www.concretepolishingassociation.com/CPAA/Home.html
www.acjstone.com
www.concretepolishingmagazine.com
www.floorsconcrete.com
www.thesunlife.org



Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products  http://www.stonecarecentral.com

Many of my informational articles can be found at www.stoneandtilepros.com

Listen to my radio show at www.blogtalkradio.com/drfred
The Ultimate Stain Remover  www.GoDrFred.com





--
Regards,
Stu Rosen
201-446-1200
www.mbstonecare.com  " WORLD CLASS STONECARE PRODUCTS "
www.mbstone.com
www.stoneshine.com
"A posse ad esse "