Schubert,
B emperador polished up like glass.
Hard to see the detail in pic but 400 g may not have been deep enough to remove wear.
Check to see if you have topical or wax maybe mop and glow.
If so remove the topical.
You may b over/under polishing as well.

On Sun, Mar 27, 2011 at 8:46 PM, Randy Frye <rfrye@comcast.net> wrote:

If you have done a final clean and buffing, You might try a light crystallizer over it to bring back some color.

Worst case you might need to re- cut with 400 resin and try polishing then. Use a window squeegee to swipe during polishing to get an idea of how long to polish. Of course if its a darker stone carry back to 1800 then monitor the polishing with the squeegee. I think it was to long with the polishing.

Hope this helps
Randy, Cleaning Edge, Naples FL

On 3/27/11 9:25 PM, "Schubert Jacques" <sejacques1124@aol.com> wrote:

Hi partners

Has anyone experience this before? I took this floor from 400 to 1800 & was very generous with the 5 X I am getting a haze that looks like a white film. Any suggestions?

Best Regards

Www.Stonemakeover.com <http://Www.Stonemakeover.com> <http://Www.Stonemakeover.com>

Schubert E Jacques
973-879-3400 <tel:973-879-3400>

Best Regards

Www.Stonemakeover.com <http://Www.Stonemakeover.com>

Schubert E Jacques
973-879-3400

Powered by http://DiscussThis.com <http://www.discussthis.com>
Visit list archives, subscribe, unsubscribe or change your subscription preferences <http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
Start a new conversation (thread) <mailto:sccpartners@stoneandtilepros.com>

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Regards,
Stu Rosen
201-446-1200
www.mbstonecare.com " WORLD CLASS STONECARE PRODUCTS "