Agree this could help.
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: Randy Frye [mailto:rfrye@comcast.net]
Sent: Sunday, March 27, 2011 9:47 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] White film / glaze
If you have done a final clean and buffing, You might try a light crystallizer over it to bring back some color.
Worst case you might need to re- cut with 400 resin and try polishing then. Use a window squeegee to swipe during polishing to get an idea of how long to polish. Of course if its a darker stone carry back to 1800 then monitor the polishing with the squeegee. I think it was to long with the polishing.
Hope this helps
Randy, Cleaning Edge, Naples FL
On 3/27/11 9:25 PM, "Schubert Jacques" <sejacques1124@aol.com> wrote:
Hi partners
Has anyone experience this before? I took this floor from 400 to 1800 & was very generous with the 5 X I am getting a haze that looks like a white film. Any suggestions?
Best Regards
Www.Stonemakeover.com <http://Www.Stonemakeover.com> <http://Www.Stonemakeover.com>
Schubert E Jacques
973-879-3400 <tel:973-879-3400>
Best Regards
Www.Stonemakeover.com <http://Www.Stonemakeover.com>
Schubert E Jacques
973-879-3400
Powered by http://DiscussThis.com <http://www.discussthis.com>
Visit list archives, subscribe, unsubscribe or change your subscription preferences <http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
Start a new conversation (thread) <mailto:sccpartners@stoneandtilepros.com>
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)