Adam,
Besides being your company policy I don’t think there is any legal reason for you to return any money to your client. He hired you and payed you for the services that you performed improving his property.His issue now is that the floor is still absorbing liquids after 2 coats of sealer was applied.At this point your process doesn’t matter but I would tell the customer that you felt you had applied a sufficient amount of sealer evidenced by your final testing . However once the product cured and the solvent evaporated the limestone is so porous that it simply needs additional sealer. I would put in writing all the facts including that you are more than willing to apply additional sealer at your expense and time to correct the issue if possible . Include in a clause stating the stone may be technically impossible to seal(see what Fred says). Show the letter to your lawyer before sending.Consider finding a sealer formulated for very porous applications. Maybe even one with a warranty if its possible.Do an area for your customer, let the product cure and check the results.
On Sat, Jul 9, 2011 at 6:33 AM, Devin Vance <classicmarblemail@gmail.com> wrote:
You will have needed more coats w a solvent sealer. Keep coating til stone doesnt absorb. Should use a thicker sealer though. Solvent is for less porous stones.
Bottom-line - bad stone choice for kitchen and wet/product-prone area. Stone will always etch with alcohol and acid. If not sealed thoroughly/appropriately you will have these issues.
I would attempt to poultice his stains and then seal with a porous stone sealer (511 porous plus - for example). Sealer needs to dwell for atleast 15-20 mins before next coat. Keep applying till no more bubbles. Buff last coat to remove tackiness.
Devin Vance
Classic Marble Restoration, Inc.
954-815-8023; classicmarblemail@gmail.com
www.classicmarblerestoration.com> Visit list archives, subscribe, unsubscribe or change your subscription preferences:On Jul 9, 2011 2:54 AM, "Info Info" <info@restoreyourtiles.com> wrote:
> Partners,
> Recently we have finished project where we stripped old, topical sealer off,
> diamond honed, powder honed and seal 740 sq ft of limestone. We used solvent
> based, impregnating sealer from SCC and floor machine to apply 2 coats. We
> also supplied SCC marble cleaner and explained in detail how to clean the
> floor.
>
> Now, week and half later, customer is complaining that the project did not
> solved his main concern that floor will be protected from the spills (not
> the etch marks). As an example he splashed water onto the floor and even
> thou water bubbled on the surface, limestone got a lot darker. His
> reasoning is that if stone gets darker, means not completely sealed and will
> stain when something else gets spilled, like oil, wine etc. He agreed that
> being a limestone, porous by nature, even pouring gallons of sealer may not
> completely seal the stone and rejected my offer to seal the floor with
> another coat of sealer. He agreed that the floor looks a lot better but
> since part of that floor is in the kitchen and dinning room and impossible
> to prevent accidental spills, it will stain. As of another example, he
> showed new, oily stains next to the fridge and poured and wiped off red wine
> onto the floor which also stained. He fills that he spent a lots of money
> for nothing and he wants to get his money back because the stains are not
> cleanable.
>
> How to explain, why the sealed limestone gets darker when wet? I always want
> to lower the expectation and over deliver the results but here I need some
> counter arguments to repel his insane request and general guidance of what
> to say to this these type of requests in the future. Returning of money is
> not an option. What should I do?
>
> Adam Bartos
> BiO Tile
>
> --
> Powered by http://DiscussThis.com
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
--
WORLD CLASS STONECARE PRODUCTS
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)