I wouldnt touch it..marmolean is a vinyl sheet material...Waxing is the only thing you can do to make it shine

On Wed, Aug 3, 2011 at 12:57 PM, Roger Konarski <qm144@yahoo.com> wrote:
I received the e-mail below from one of my referral sources. Can I help them out with their problem?
Thanks,
RK

 


---
Hello Roger

Thank you in advance for your help.

As i said earlier. We installed a forbo 13x13 marmolean flooring.( which doest require a finish)

The maintenance crew , after we completed it installed a high gloss finish. It looked awful.

They then stripped the wax and it seems theyremoved coloring from the floor. It has a slight chaulk surface to it.  I did apply 2 coats of a carefree matte finish sealeron a test area. It brought back the color. But there is still a low luster gloss on the tile.

Is it possible to scuff the gloss and bring the finish closer to the factory finish.

Please let me know, and thanks again for your help.






Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products  http://www.stonecarecentral.com

Many of my articles can be found at www.stoneandtilepros.com
Listen to my radio show   www.blogtalkradio.com/drfred
office             321 514 6845      
See my specialty products at  www.godrfred.com