Don,
One thing you may want to do is attach you diamonds onto a hog
hair pad if you need to hone. This will allow the pad to go into the edges and
hole and then as Fred said use 5X polish and polish the stone.
If you want to add some additional shine you could do a light crystallization
to the floor .
John E. Freitag
The Stone and Tile School
From: Fred Hueston
[mailto:fhueston@gmail.com]
Sent: Friday, November 18, 2011 4:02 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] marble
Don
It may be difficult to do
without grinding the floor flat but you can try to do hard polish with
some 5x powder. Of course this will depend on how bad the cornors have rubbed
off. Try this first. The next step would be to try a light hone with a 400
grit. Tell the customer there is no guareentee. If they want it the
Dive in Look than they will have to pay for a full grind
On Fri, Nov 18, 2011 at 1:54 PM, Don Kasch <don@floorrestorationspecialists.com>
wrote:
hope someone can help, I have aprox. 2500 sq ft of a light
marble 24x24. in shipment some of the corners rubbed the polish off. alot of
the marble has already been installed and they would like not only to fix the
corners but the lady would like the polish to be like she could dive into it!
the floor is pretty flat but there are slight height differences is some
of the tiles. I'm trying to stay away from a full grind down but... What do you
think
--
Don Kasch
Floor Restoration Specialists
floorrestorationspecialists.com
801.358.0423
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your
subscription preferences
Start a new
conversation (thread)
--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products http://www.stonecarecentral.com
Many of my articles can be found at www.stoneandtilepros.com
Listen to my radio show www.blogtalkradio.com/drfred
office 321 514
6845
See my specialty products at www.godrfred.com
Powered by http://DiscussThis.com
Visit
list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation
(thread)