Thanks Randy.
I have to drive over two and a half hours to this job so returning another day is something I would rather not do.
Is crystallizing the only way to get a nice shine? I have heard some would use a granite powder instead.
Jason
From: Randy Frye [mailto:rfrye@comcast.net]
Sent: Wednesday, December 31, 2008 4:03 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Green Marble
Jason:
Q. Any chance I can get away with not grinding or would this be too risky?
A. If your resin diamonds don't chip up going over the lippage you can get away with not grinding.
Q. Would I use diamonds to remove the wax or use a stripper prior?
A. Stripper
Q. I am wondering what to use to get the best shine?
A. Work your diamonds up to at least 3500 resin, polish with a mild marble polishing compound, wait a day for the stone to dry out come back and use a quality crystallizer to bring up the shine.
Good luck
Randy
Cleaning Edge, Naples, FL
From: Jason Francis [mailto:jfrancis@protocolfloorcare.com]
Sent: Wednesday, December 31, 2008 3:21 PM
To: Restoration and Maintenance
Subject: [sccpartners] Green Marble
Hi Guys,
I am hoping to get as much feedback as possible for my first green marble job. It is a bathroom 10 years old and has a couple stains. The customer has put butchers wax on on a couple occasions. It has very minor lippage. Any chance I can get away with not grinding or would this be too risky? Would I use diamonds to remove the wax or use a stripper prior? I am wondering what to use to get the best shine? I have MB-12, the new mb-20 cream for granite(curious if anyone has used), or just a tin oxide powder? The adjacent walls are also marble so I am hoping that I can get the floor dark again.
Thanks for your feedback,
Jason
Protocol
Jason Francis
Stone Restoration Projfrancis@protocolfloorcare.com
333 Norton Road
Red Hook, NY 12571
tel: 845-758-6262
fax: 845-622-4886
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)