Baird,

Dust buddy is a shroud that attaches to some hand grinders and perhaps some polishers. You attach that to a true HEPA vacuum to keep the dust down to a minimum.

Google Dust Buddy but I think the website is Dustless something or other.

J

Sent from a smartphone.

From: Baird Standish <bairdstandish@gmail.com>
Date: Fri, 30 Mar 2012 13:58:53 -0400
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
ReplyTo: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] Edge issues-light and dark

Thanks guys. This edge work is a pain in the butt. Stuart, what is a dust buddy?  You mean like a dirt devil kind of thing?
B

On Friday, March 30, 2012, stuart rosen <mail@stoneshine.com> wrote:
> Baird,
> I agree with John-that is a profile created by a scratch pattern related to blending in those edges.
> This happens to all of us in one form or another on large grinding jobs.When the floor is wet everything looks great!
> Anyway like John says its hands and knees time. From what I see on that floor you may want to go dry using sandpaper like 80g /120g/220g or a combination using resin diamonds as well. What ever gets you to be able to eliminate the profile.
> If you use a dust buddy you can work fast and bang this out.Once you figure out which grits and or process will remove the profile you can finish it off with the floor machine and the honing powder or the same abrasive you finished the body of the floor with.Working in that manner may save you some time. Five inch sandpaper should work well for you in this case. Good luck.
>  
>  
> On Fri, Mar 30, 2012 at 8:13 AM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:
>
> Baird,
>
>  
>
> From the pictures I don’t think this is a sealer issue. I feel it a honing issue. From the pictures it appears you honed up to and within 3 to 4 inches of the edge, were these areas hand honed?
>
> It appears you are leaving this floor at a low honed finish and the edges still have the original finish left on the stone. As I look at these pictures you can see where the honing was as the scratches for the honing with a floor machine has never been blended into the edges.
>
>  
>
> Regarding the linseed oil and mineral spirits if anyone uses this mixture be careful as to how you handle the applicator after you finish the job, just don’t throw this in you truck. Linseed oil has a low very low flash point and unless you soak the applicator in water with some type cleaner you can run a HIGH RISK of catching a truck , your warehouse or wherever this applicator end up on FIRE !!!
>
>  
>
> I know of several people including myself early on in my stone career that have burnt up trucks.  CAUTION  CAUTION when using this mixture.
>
>  
>
> So Baird I would recommend you go back and do some hand work with diamonds and I think you will see these edges blend in.
>
>  
>
>  
>
> John E Freitag
>
> Director
>
> The Stone & Tile School
>
> Office 407-567-7652
>
> Cell 407-615-0134
>
> jfreitag@thestoneandtileschool.com
>
>  
>
> --
> Regards,
> Stu Rosen
> 201-446-1200
> www.mbstonecare.com 
> www.mbstone.com
> www.stoneshine.com
> "EVERYTHING MATTERS "
>  
> ________________________________
>
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences
> Start a new conversation (thread)

--
PLEASE NOTE OUR NEW ADDRESS AND PHONE NUMBERS.  THE OLD NUMBERS WILL WORK FOR SOME PERIOD OF TIME.
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave.
Philadelphia, PA 191118
Phone: 267-331-5369
Fax: 267-331-5771

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)