Zev,

if the honed jg floor has color enhancer buildup it was over or misapplied.use 280 grit honing powder to remove the excess go slow and right to the edge.test a small area and check the result.check the color of the gout and if its sanded or not.take action so you dont turn them white.clean off your test area and if its looks good get the ok to complete the job from the customer.talk to customer about sealing. charge accordingly.chemicals may be needed but hopefully not.150 and 180 grit honong powder will pretty much take most sealer residue off a surface if you need it.Then you can finish the floor with a 280 or 400 powder(most uniform)or one of those monkey pad things(quicker sometimes)if the finish is acceptable to the client.

On Thu, Jan 22, 2009 at 7:31 PM, rod medel <rodsuperiorstone@yahoo.com> wrote:

I agree with the same sealer and reactivate thing but again when you do this make sure all residue is removed otherwise your in the same boat.Most likely it has around a 400 grit finish a little clarity low sheen if thats the case I can see the reason to use color enhancer but if it's polished it's pointless, again imho....

--- On Thu, 1/22/09, Don Semi <don@srsdenver.com> wrote:

> From: Don Semi <don@srsdenver.com>

> Subject: RE: [sccpartners] Color enhancer sealer

> To: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
> Date: Thursday, January 22, 2009, 4:28 PM

> Zev: As suggested, go get the same sealant and it should
> break it down and
> come off. All of the suggestions will work though.
>
> On Thu, Jan 22, 2009 at 4:12 PM,
> <zev@stonerestorationplus.com> wrote:
>
> > Hi I went down to look at the floor and some of the
> tiles looked like
> > they were polished. The color enhancer that they used
> was from
> > STONE TECH PROFFESIONAL RICH COLOR ENHANCER
> SEALER. I hope this
> > helps.
> >
> > On 1/22/09, Marble Maestro
> <777-7797@videotron.ca> wrote:
> > > Both are great suggestions.
> > >
> > >
> > >
> > > Without knowing what product it is, its difficult
> to be exact.
> > >
> > >
> > >
> > > I would be interested to know which it is.
> > >
> > >
> > >
> > > Some of the sealers such as SIM from Lithofin,
> you can reapply some
> > sealer
> > > on the surface, allow it to work its way in,
> agitate it with a red pad
> > and
> > > remove it as you would as if you had just sealed
> it.
> > >
> > >
> > >
> > > Every Impregnator has a different way to apply
> and to "remove", you have
> > to
> > > find the ones you are comfortable with. Color
> enhancing especially is
> > not
> > > a
> > > natural process and not as easy to do as they let
> you think.
> > >
> > >
> > >
> > > Anthony Masecchia
> > >
> > > Master Stone Consultant
> > >
> > >
> > >
> > > Marble Maestro tm
> > >
> > > 6615 Papineau
> > >
> > > Montreal Quebec
> > >
> > > H2G 2X3
> > >
> > > 514-777-7797
> > >
> > > 514-904-1815
> > >
> > >
> > >
> > > www.777-7797.com
> > >
> > >
> > >
> > > _____
> > >
> > > From: rivera.gm@gmail.com
> [mailto:rivera.gm@gmail.com] On Behalf Of
> > Georgia
> > > Rivera
> > > Sent: January 22, 2009 3:45 PM
> > > To: Restoration and Maintenance
> > > Subject: RE: [sccpartners] Color enhancer sealer
> > >
> > >
> > >
> > > I have used acetone and a pad to remove color
> enhancer. It won't change
> > > the
> > > finish but you might have to reseal afterward
> with an impregnating
> > sealer.
> > >
> > > On Thu, Jan 22, 2009 at 2:35 PM, rod medel
> <rodsuperiorstone@yahoo.com>
> > > wrote:
> > >
> > >
> > > Honing powder.... grit will depend on the finish
> i would do a 220 or 400
> > > mb's powder is awesome.I have just found
> doing the stripper,cleaner the
> > > masking just isn't worth it when you are
> going to have to use honing
> > powder
> > > when done anyway.
> > >
> > > --- On Thu, 1/22/09, Zev Guez
> <zev@stonerestorationplus.com> wrote:
> > >
> > > From: Zev Guez
> <zev@stonerestorationplus.com>
> > > Subject: [sccpartners] Color enhancer sealer
> > > To: "Restoration and Maintenance"
> <sccpartners@stoneandtilepros.com>
> > > Date: Thursday, January 22, 2009, 8:17 AM
> > >
> > >
> > >
> > > Hi I am going today to look at a honed jerusalem
> gold limestone that was
> > > color enhanced and the customer said that in some
> areas there is a builup
> > > and residue. What would be the best way to remove
> it .
> > >
> > > --
> > > Zev Guez
> > > Stone Restoration Plus
> > > (732) 309-3878
> > > www.stonerestorationplus.com
> <http://www.stonerestorationplus.com/>
> > >
> > > _____
> > >
> > > Powered by http://DiscussThis.com
> <http://discussthis.com/> <

> > http://www.discussthis.com/>
> > > Visit list archives, subscribe, unsubscribe or
> change your
> > >
> <http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
> > > subscription preferences
> > > Start a new
> <mailto:sccpartners@stoneandtilepros.com>
> conversation
> > > (thread)
> > >
> > >
> > > _____
> > >
> > > Powered by http://DiscussThis.com
> <http://discussthis.com/> <

> > http://www.discussthis.com/>
> > > Visit list archives, subscribe, unsubscribe or
> change your
> > >
> <http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
> > > subscription preferences
> > > Start a new
> <mailto:sccpartners@stoneandtilepros.com>
> conversation
> > > (thread)
> > >
> > >
> > >
> > >
> > > _____
> > >
> > > Powered by http://DiscussThis.com
> <http://discussthis.com/> <

> > http://www.discussthis.com>
> > > Visit <
> >
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
> > > list archives, subscribe, unsubscribe or change
> your subscription
> > > preferences
> > > Start a new conversation
> <mailto:sccpartners@stoneandtilepros.com>
> > > (thread)
> > >
> > >
> > >
> > > --
> > > Powered by http://DiscussThis.com
> <http://discussthis.com/>

> > > Visit list archives, subscribe, unsubscribe or

> change your subscription
> > > preferences:
> > >
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> > > Start a new conversation (thread):
> sccpartners@stoneandtilepros.com
> > >
> > >
> >
> >
> > --
> > Zev Guez
> > Stone Restoration Plus
> > (732) 309-3878
> > www.stonerestorationplus.com
> >
> > --
> > Powered by http://DiscussThis.com
> <http://discussthis.com/>

> > Visit list archives, subscribe, unsubscribe or change

> your subscription
> > preferences:
> >
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> > Start a new conversation (thread):
> sccpartners@stoneandtilepros.com
> >
> >
> >
> >
>
>
> --
> Sincerely:
>
> Don Semi
> Stone Restoration Services - Denver
> Dedicated to the Preservation of Fine Surfaces
> don@srsdenver.com
> 303-249-7909
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your
> subscription preferences:

> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.com

--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com

--
Regards,
Stu Rosen
201-446-1200
www.stoneshine.com
"A posse ad esse "

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)