one thing i would warn you  about on epoxy terrazzo is that it should be ground wet...we followed up a dry only grinding company out of texas who came up here to Kansas City...they ground it dry and they melted the epoxy...it smeared  and covered up the rock..we were able to correct it easily by honing wet, just a little info for ya..also epoxy terrazzo seems to have alot more pinholes. hopefully the sealer will fill the pinholes up. I think 100 hybrids should do ya good..


From: Darek Nicinski <mail@rocklandstonerestoration.com>
To: Restoration and Maintenance <sccpartners@stoneandtilepros.com>
Sent: Sunday, April 29, 2012 9:29 AM
Subject: RE: [sccpartners] Terrazzo tiles

John, it is epoxy terrazzo in cafeteria and i will go to, i think 100 or 200 hybrids since its spec to be coated and they don't want shine.
I talk to the guy from Hilyards and he recommended Satin floor finish, but i don't like the idea of a floor finish.
 Did you ever worked with the terrazine? Hilyards web doesn't give me any info as far as the shin level.

On Sat, Apr 28, 2012 at 2:37 PM, john jackson <kcstoneguy@yahoo.com> wrote:
Derek, is that epoxy terrazzo? how high up is it polished? I used the sealers on concrete terrazzo that was honed only to 100 resin and it did not have high gloss..You may want to give a look to the terrazine made by Hilyards, it is definately a matte sealer and very simple. According to what Terrazzo and Marble Supply told me, they recommend an acrylic sealer be used on the terrazzo, and to not wax the floors..


From: stuart rosen <mail@stoneshine.com>

To: Restoration and Maintenance <sccpartners@stoneandtilepros.com>
Sent: Saturday, April 28, 2012 12:52 PM

Subject: RE: [sccpartners] Terrazzo tiles

Darek,
did you call Glaze and seal they have a couple of pretty decent acrylic easy to apply low gloss sealers.
They are quite durable as well.
Also Joncrete(johnsondiversey) has a matte finish acrylic sealer that is worth looking at.Its for concrete but I am sure it will work on epoxy terrazzo.
You might also want to give sparks southwest a call -they can tell you how to dilute one of their sealers to a matte finish by adding water to it. Good Luck. 


 
On Fri, Apr 27, 2012 at 10:06 PM, Darek Nicinski <mail@rocklandstonerestoration.com> wrote:
John, stain blocker and decra seal are advertise as hi gloss i will call them Monday


On Fri, Apr 27, 2012 at 6:24 PM, Baird Standish <bairdstandish@gmail.com> wrote:
Hi Derek. Another thing you can try is a two step terrazzo conditioning process developed by national chemical lab in Philadelphia. Start with Rock hard solution and then go to Patina. It is put down with a hogs hair pad. They use this on all the newer Wawa convenience stores around here  as a maintenance plan. It gives a nice sheen without being very glossy and I believe doesn't need to be stripped.


On Friday, April 27, 2012, john jackson wrote:
derek , i would also look at the waterbased sealer from American Decorative Concrete..i think it is called Stain Blocker, its the exterior version, its  pretty low sheen and gives a good build. I also used the Decra Seal from WR Meadows and its not super high gloss either...both are around 30% solids, and you spray it down with a fan tip, then back roll..gives a good build and it levels out nicely.


From: Darek Nicinski <mail@rocklandstonerestoration.com>
To: Restoration and Maintenance <sccpartners@stoneandtilepros.com>
Sent: Friday, April 27, 2012 12:38 PM
Subject: RE: [sccpartners] Terrazzo tiles

I'm preparing for epoxy based terrazzo restoration in high end cafeteria and the specs are to apply matte or satin topical sealer after honing.
i checked with lots of terrazzo suppliers and everybody have only hi-gloss sealer or matte finishes that are two components and difficult to apply.
Any of you have used or would recommend any product that is compatible with all the above?

On Tue, Apr 24, 2012 at 9:41 PM, Michael Marsoun <nulifesc@bigpond.com> wrote:
Looks like currently it is white cement. I think I would trust that more. 

Sent from my iPhone

On 25/04/2012, at 11:29 AM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote:

Mike ,
 
I agree with Stu
 
 
John E Freitag\
Director
The Stone & Tile School
 
<image001.jpg>
 
 
 
 
From: rosen.stuart@gmail.com [mailto:rosen.stuart@gmail.com] On Behalf Of stuart rosen
Sent: Tuesday, April 24, 2012 9:14 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Terrazzo tiles
 
Mike,
Portland cement or regular grout with the latex will give you good results but I think the pre-colored grouts will give you a better variety of colors.
Not sure what you can get down under but we have a good range off white grouts that work well.
On Tue, Apr 24, 2012 at 7:56 PM, Michael Marsoun <nulifesc@bigpond.com> wrote:
Thanks guys. Do you think white cement will bond better than white grout?

Sent from my iPhone

On 24/04/2012, at 11:32 PM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote:

> Mike,
> I if you have an 1/8 inch the re-grout will probably work. Use 70 to 75
> percent latex additive to your mixture an float the floor allow to dry a



--
PLEASE NOTE OUR NEW ADDRESS AND PHONE NUMBERS.  THE OLD NUMBERS WILL WORK FOR SOME PERIOD OF TIME.
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave.
Philadelphia, PA 191118
Phone: 267-331-5369
Fax: 267-331-5771



--
Regards,

Darek Nicinski
Rockland Stone Restoration
845-323-7333
www.rocklandstonerestoration.com





--
Regards,

Darek Nicinski
Rockland Stone Restoration
845-323-7333
www.rocklandstonerestoration.com

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)