Where are the photos what color is the spot?
Hector Castillo
From: Fred Hueston [mailto:fhueston@gmail.com]
Sent: Monday, May 07, 2012 5:37 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Carpet Cleaning
did you use polishing powders...if so the oxalic acid in the powder could have bleached the carpet..If thats the case the carpet may have to be redyed
On Mon, May 7, 2012 at 7:41 PM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:
Guys ,
I not a carpet expert , but before going to chemicals see if it will brush out first. Then is that does not work try using some Neutral cleaner and wet the spot , blot it don’t wipe it . it that does not work then try some of the other ideas from the partners that clean carpet.
John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: Paul Bunis [mailto:pbunis@aol.com]
Sent: Monday, May 07, 2012 2:13 PM
To: Restoration and Maintenance
Cc: Restoration and Maintenance
Subject: RE: [sccpartners] Carpet Cleaning
Please
Everyone wait just a second. First find out the cause of the stain. Then at least ask what the carpet is made of befofore you go pouring anything on it. Best guess is that the spot is probably slurry that dried. If this is the case leave the carpet dry and brush the spot with a dry white towel. If its slurry is should be powdery and will most likely brush away. Also vac when u are finished. You need to ask questions and test first...remember ???
Paul Bunis
On May 7, 2012, at 1:57 PM, Randy Frye <rfrye@comcast.net> wrote:
Carpet spot removal
Put gloves on, wet, with water, and ring out, a white terry cloth towel, put over the spout, of the container of acetone, applying acetone to the damp rag, and lightly wipe spots. If you get any color on the white towel this means you are on the right track, however be careful not to rub the fiber too much as this will fray the carpet fiber. This will work unless it is bleached or color has been added to the carpet. Any soapy or foaming type solution, if used, would need to be rinsed out or the spots will become worse over time, because of chemical left in the fiber, the acetone/water combination will not leave any residue to re-soil over time therefore it needs no rinse. I hope this helps.
Sent from Randy Frye at Cleaning Edge
On May 7, 2012, at 10:47 AM, Roger Konarski <qm144@yahoo.com> wrote:Cust called and stated we left a few spots on their Capet. Yes we do cover outside our work area with drop clothes. Anyway, any recommendations on a spot remover for the carpet.
Thanks,
RK
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
-- 
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products http://www.stonecarecentral.com
Many of my articles can be found at www.stoneandtilepros.com
Listen to my radio show www.blogtalkradio.com/drfred
office 321 514 6845
See my specialty products at www.godrfred.com
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)