If you want a lot of productivity than you may want to consider one of the larger planatary head machines


On Tue, May 15, 2012 at 12:31 AM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:

Baird,

 

Does this machine have any head pressure?  If so then it may work. I find the larger auto scrubbers work better due to their size. The 24 inch auto scrubber is not going to give you much more productivity then using a 22 inch drive plate on your floor swing machine. 

 

 

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

 

From: Baird Standish [mailto:bairdstandish@gmail.com]
Sent: Monday, May 14, 2012 4:11 PM


To: Restoration and Maintenance
Subject: RE: [sccpartners] Pure white quartz

 

Interesting. John, how do you set up the scrubber?  I have a little used 24" tenant auto-scrubber that I have been thinking about converting but not sure what it takes to get it working right,
B

On Mon, May 14, 2012 at 3:55 PM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:

Are you doing this using a walk behind scrubber or a swing machine.

 

I would recommend you do this size job using a walk behind scrubber to diamond hone with.

The additional time will depend upon the type of machine you are using and the size of the machine and if you are using a walk behind scrubber

 

 

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

 

From: amondor@a1cement.com [mailto:amondor@a1cement.com]
Sent: Monday, May 14, 2012 12:57 PM
To: Restoration and Maintenance


Subject: RE: [sccpartners] Pure white quartz

 

Thanks

Howmuch more time on the floor than say a normal carrera for a job like this
Do u0think

A

Sent on the TELUS Mobility network with BlackBerry


From: "John Freitag" <jfreitag@thestoneandtileschool.com>

Date: Mon, 14 May 2012 11:38:07 -0400

To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>

ReplyTo: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>

Subject: RE: [sccpartners] Pure white quartz

 

Armand,

 

The mechanical polish id going to give you the shine, however I think to get the glossy shine you may need to hone up to a 5500 or 8500

 

Once you cut the floor flat you should not have any problems with the scratches on the edges. Make sure your first grind the floor is totally flat. If the floor is not totally flat then you could have a problem the scratches on the edges.

 

 

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

schoollogo

 

www.thestoneandtileschool.com

 

 

From: Armand Mondor [mailto:AMondor@a1cement.com]
Sent: Monday, May 14, 2012 10:14 AM
To: Restoration and Maintenance
Subject: [sccpartners] Pure white quartz

 

Hi Guys

 

I have been asked to grind flat, hone & polish 14,000 Sq. Feet of quartz tile that is the whitest and shiniest I have ever seen.

 

 

The owner has received the 12X24 tiles and is going to have them installed in his high end shopping mall.

The tile setter has found thickness inconsistencies and has determined the best solution is to flatten in place and re polish.

 

I have some sample tiles and am going to do a shop floor mock up on a piece of plywood but before beginning would appreciate you input.

 

I have worked on a similar textured and grainy tile – a sort of pink which apparently came from India. My biggest problem with that stuff was that it

showed edge scratching worse than anything I’d seen b4.

 

Intend to do a complete mechanical diamond resin pad grind,hone polish all the way to 3000 to try to duplicate factory shine without reliance on

any finishing powders.

 

 

Would appreciate your input

 

Thank You:

 

Armand

 


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
PLEASE NOTE OUR NEW ADDRESS AND PHONE NUMBERS.  THE OLD NUMBERS WILL WORK FOR SOME PERIOD OF TIME.
________________________________________
>From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave.
Philadelphia, PA 191118
Phone: 267-331-5369
Fax: 267-331-5771


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
www.safeandcompliant.net

Recommended stone care products  http://www.stonecarecentral.com

Many of my articles can be found at www.stoneandtilepros.com
Listen to my radio show   www.blogtalkradio.com/drfred
office             321 514 6845      
See my specialty products at  www.godrfred.com