Yes but be careful
Guys, I just run out of dark granite polishing powder. Can I use powder for light color granites and add some black pigment from estern marble?It's black absolute granite ctop.
Adam BartosBiO Tile & Grout Restoration773-575-5515 (c)847-438-0212 (o)CARL,
The crystallization and dark granite powder will do the trick.
Apply approximately ½ teaspoon of powder onto the countertop, spray crystallizer onto the powder. use a #1 steel wool pad and smear the powder/paste over the area you want to polish polish the powder into the stone until completely gone, then add some additional crystallizer and the powder will come back alive out of your pad. Do this until the powder is all gone. Then flip over your steel wool pad and apply some more crystallizer and continue to polish.
Another method is to us some MB 20 Polish, follow the instructions and it will give you shine and color. If when you are done with either method and you need some additional color use the Tenax Trepox colorant and wipe in on the surface allow it to penetrate and buff off the excess residue
Try these options and see how they work for you.
John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
<image001.jpg>
From: Pat Staples [mailto:cpstaples@msn.com]
Sent: Tuesday, May 22, 2012 12:43 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Black Granite
When doing seams I was using the alpha system and final polishing with black diaglow for granite and a lead/felt wheel and getting back to factory,
This job, someone went in a tried to pop the shine up a little bit on all the countertops in a kitchen and failed. Took the shine off instead of popping it up.
I am trying to see if there is an easier method now to get back to factory without the lead/felt and building up a lot of heat.
I know I can get it back the old fashion way but I am looking for something easier with all the technology out there today.
Not sure if you can see it in the picture I am sending, but if you look into the top light bulb you can see the right-side is still polished and the left is where they dulled it.
Carl Staples
Classic Marble & Stone Restoration
Marblerestore.com
----- Original Message -----
From: John Freitag
Sent: Tuesday, May 22, 2012 11:08 AM
Subject: RE: [sccpartners] Black Granite
Carl,
What are you currently using to polish black granite? How high are you honing the stone to ?
John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
<image002.jpg>
From: Pat Staples [mailto:cpstaples@msn.com]
Sent: Tuesday, May 22, 2012 11:00 AM
To: Restoration and Maintenance
Subject: [sccpartners] Black Granite
Are there any new polishes on the market for face polishing black granite back to a factory finish?
Thank You
Carl Staples
Classic Marble & Stone Restoration
Marblerestore.com
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)