I agree with Randy definitely go higher in the grits. The surface looks underpolished- try using more powder and do the top in sections.
It will always be hard to get around the hardware sometimes if possible nice to have them out.

On Tue, Jun 12, 2012 at 8:29 PM, Randy Frye <rfrye@comcast.net> wrote:
You may try next time going higher in the grits before polishing 1800 or 3000 then polish.

On Jun 12, 2012, at 6:54 PM, Don Semi wrote:

Hi all: 

I know this has been addressed before but could not locate it. Surface finish not at all even. Did 120 - 600 followed by 5x. All areas pop but some more than others. Ideas? Thanks

Don Semi
Stone Restoration Denver, llc 

Begin forwarded message:

From: Don Semi <srsdenver@gmail.com>
Date: June 12, 2012 4:32:19 PM MDT
To: "srsdenver@gmail.com" <srsdenver@gmail.com>
Subject: Pic


Stu Rosen