Jason make tour own use DE POWDER this is the powder they use in swimming pool filters.  You can buy from a pool supply store or some home depot Lowes carry it . Mix iron out and the powder into a paste consistent like pancake batter or a peanut butter consistency.  Apply over stain approximately 1/4 inch thick
Cover with plastic allow to work for at least 24 hours.  Then uncover and check to see if stain is gone.  More thanone application may needed

Sent via DroidX2 on Verizon Wireless™


-----Original message-----
From: stuart rosen <mail@stoneshine.com>
To: Stone and Tile PROS Technical Support <sccpartners@stoneandtilepros.com>
Sent: Tue, Aug 28, 2012 23:17:27 GMT+00:00
Subject: RE: [sccpartners] Homemade poultice

Use iron out
Best melt in water then mix with de.
But i have had good results just mixinv with water and applying.
Rust stains in white marble can be tough.

On Aug 28, 2012 6:08 PM, "Jason Francis" <jfrancis@marbleglow.com> wrote:
Hi guys,

I have rust to remove on white marble. Im out of poultice powder and have a deadline to meet so don't have time to order. Can I make my own to mix w iron out? Can I pick something up at home depot? Don't think they sell dia. earth.

I have rsr 2000 but haven't had good success. I also have alpha general poultice. Can I mix in some iron out?

Thanks!

Jason
Marbleglow

Sent from my iPhone
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com



Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)