Stripping the wax is the most important part of the job and when people tell me they charge twenty five to thirty five cents a square foot to remove it I get crazy. You may think it's an easy wax to remove but will all the products on the market now ( solvent based sealers, urethanes to name a few ) there's alot of tough ones out there and some of them need to be priced at $2.00 per square to remove, especially if they want to be LEED compliant and need a "Bio-Degradable stripper . I used to have a person working for me with the first name Jason that John knows quite well and he would charge our competition fifty cents a square foot to strip and prep the floor while the applicator was charging $3.50 a sq ft to stain and seal. We did all the hard work and this guy would come in and take credit for the great job. There no such thing as an easy stripping job but my advice to everyone out there is to use Frog Tape and also make sure the customer knows that the baseboards might get messed up.The nature of the beast is that the same product that used to remove the existing sealer will also get under the tape and have a potential to harm baseboards. Sometimes stripping pads work the best, sometimes red or black brushes will be better depending to the grout and pitting of the tiles.
CJ
Yes you need to strip the wax. When stripping the wax , I prefer to use a soft brush it last much longer than stripping pads and the waxes will not gum up the pad . the brush will coat anywhere from $150 top 200 depending upon where you purchase it. I would recommend using a 22 inch brush in the open areas. This gives you much better productivity.
John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
From: CJ Crow [mailto:cjcrow@stonemaintenanceinc.com]
Sent: Friday, August 31, 2012 12:17 PM
To: Stone and Tile PROS Technical Support
Subject: RE: [sccpartners] Large Terrazzo job
Thanks gentlemen!
C.J. Crow
In HIS grip
Sent form my iPhone
On Aug 29, 2012, at 5:22 AM, Fred Hueston <fhueston@gmail.com> wrote:yes, I would use a chemical stripper to remove the wax. And yes have done lots of government work..Its a real pain and they will take the lowest bidder.
On Tue, Aug 28, 2012 at 3:41 PM, Stuart Young <santafefc@sbcglobal.net> wrote:
CJ,
We use a waterbased stripper to remove wax from stone, in conjunction with a stripping pad (black) on a floor machine. Unless you remove the wax first, honing will not be effective.
Stuart Young
Santa Fe Floor Care
On Aug 28, 2012, at 1:46 PM, CJ Crow wrote:
When removing wax from a terrazzo floor, prior to honing and polishing, do you guys ever use a non-abrasive stripper or do you simply remove any existing wax by honing?
Reason for this question is I have been asked to use a non-abrasive stripper to remove wax prior to honing and polishing and I don't recall this being a suggested method in my training.
Also, have any of you guys successfully bid on a government job? I am working through one right now and access was limited to one short visit of job site and Im expected to go off their plans and pictures. If any of you have had to fight a battle similar to this and have advise I would appreciate it.
Thanks and I hope all is well and business is good for everyone!
C.J. Crow
Stone Maintenance Inc.
In HIS grip
Sent form my iPhone
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com
--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
Recommended stone care products http://www.stonecarecentral.com
Many of my articles can be found at www.stoneandtilepros.com
Listen to my radio show www.blogtalkradio.com/drfred
office 321 514 6845
See my specialty products at www.godrfred.com
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)