Hi. I looked at a new bathroom floor. The installers used sanded grout for the installation. In a number of tiles there is fine pitting that probably came from the installers wiping the excess grout off the surface of the tiles. Otherwise the polish is excellent and the tiles have no scratches. I think that just polishing may get much of it out but maybe not all of it. I want to do the least amount of honing and avoid pulling more sanded grout over the surface (there is a fair amount of clearance between the frot level and the tiled surface). Was wondering if anybody has an opinion on what level of honing may be needed to get those tiles looking great. For example, does honing above 800 grit only make sense?  Thanks for your input.
Baird

--
PLEASE NOTE OUR NEW ADDRESS AND PHONE NUMBERS.  THE OLD NUMBERS WILL WORK FOR SOME PERIOD OF TIME.
________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave.
Philadelphia, PA 19118
Phone: 267-331-5369
Fax: 267-331-5771

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)