You can also use sandpaper dry-just hold the sandpaper to a white pad and it will follow the contour of the edge. remove the scratches(take up to 400) and polish with what ever you use by hand or on a 3 inch pad driver.Hopefully those scratches arent stuns and they come out. 

On Sun, Sep 30, 2012 at 11:43 AM, Fred Hueston <fhueston@gmail.com> wrote:
There are several methods to remove the scratches on the edges. First I will assume you need to do this in place. For this reason you will need to contain the water. There are a set of hand pads that will match the edge profile that you can use. This will require the least amount of water. If you can take the piece outside or to a shop than you can use a polisher with flexible diamond pads.


On Sun, Sep 30, 2012 at 12:38 PM, PJ Raduta <pjraduta@diamondstoneandtilecare.com> wrote:
Hey partners,

I was wondering what sorts of processes you use to to address scratching on non-flat surfaces. A client is asking me to remove some scratches on the beveled edge of a countertop (see photo), and am interested in what sorts of things have been successful for you in the past. I imagine I might encounter more atypical surfaces in the future (another client was asking me about working on marble sculptures), so any insight would be helpful.

Thanks,
PJ

--
PJ Raduta
Diamond Stone and Tile Care
 
 


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)




--
Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com
www.safeandcompliant.net

Recommended stone care products  http://www.stonecarecentral.com

Many of my articles can be found at www.stoneandtilepros.com
Listen to my radio show   www.blogtalkradio.com/drfred
office             321 514 6845      
See my specialty products at  www.godrfred.com



--
Regards,
Stu Rosen
201-446-1200
www.mbstonecare.com 
www.mbstone.com
www.stoneshine.com
"EVERYTHING MATTERS "