the nice thing about MB 12 is that in most cases its a product that we are carrying anyway. Another tool in the tool kit and one less MSDS sheet to think about.
 
In a message dated 10/21/2012 8:30:42 P.M. Eastern Daylight Time, kcstoneguy@yahoo.com writes:
i used the soap scum remover from mb..also heard a product called "bar keepers friend' available at most supermarkets

From: "PBunis@aol.com" <PBunis@aol.com>
To: Stone and Tile PROS Technical Support <sccpartners@stoneandtilepros.com>
Sent: Sunday, October 21, 2012 7:27 PM
Subject: RE: [sccpartners] shower glass

The real easy answer is MB 12.
 
It works
 
In a message dated 10/21/2012 7:34:27 P.M. Eastern Daylight Time, Hectorcastillo@comcast.net writes:
Yes there are system I  for glass polishing .
Basically you need an open face abrasive with a glass polishing compound cerium oxide.
You need to test and find you feel for the use of these products.
I have been think of setting  up a kit for  this problem.
 
Grits around 500 to 600 work good for removing hard water stains I have used this with 5x for removing hard water.
You can use 5x alone but it take a long time for it to work test test  and them test more till your happy.
I currently use disk from the glass hog and the glass renew but they will not sell to you with out spending about 2495 if I remember that’s the price for a kit
 
If you have and question call me  805-739-0169
I have some  extra disk, not many but they work very well !
Hector Castillo
 
From: propartner ken [mailto:propartner@marbleperfect.com]
Sent: Sunday, October 21, 2012 3:38 PM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] shower glass
 
Hi Partners,

anyone have a system for getting shower glass clean?    

you look at the job and see water/ soap marks that never want to come off?? 

razor blades and chemicals dont help get them clear like they were originally

thanks  Ken

Ken De Melis

Marble Perfect
=


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

=