This is pretty much the way I have stripped Mexican tile and have charged about the same. I know people get frustrated by Aldon, but I have used their premium stripper many times (a gel) and have recoated often with mexiglaze and a polymer topcoat. The whole thing is messy and stinks  the process needs a lot of air. I always recommend that the owners stay somewhere else for a day or two. The mexiglaze dries quickly and, if there is good ventilation, it's not too bad. I have never seen epoxy on Mexican tiles so haven't had to remove any.

On Tuesday, April 16, 2013, Bellastonecare <bellastonecare@gmail.com> wrote:
> I charge 5 to 8 a square foot for full strips on multiple coats whether its water or oil based. All done by hand using a combination of scrapers, wire brushes and grill screens. After its all stiped I then use a floor machine with 13 inch red brush from malish. Sparks dress up and sparks international for finish
>
> Sent from my iPhone
> On Apr 16, 2013, at 1:15 PM, john jackson <kcstoneguy@yahoo.com> wrote:
>
> i have pics of failed stip job..they put paint stripper down and went  back to .mexico.
>
>
> ________________________________
> From: Fred Hueston <fhueston@gmail.com>
> To: Stone and Tile PROS Technical Support <sccpartners@stoneandtilepros.com>
> Sent: Tuesday, April 16, 2013 12:39 PM
> Subject: RE: [sccpartners] Mexican tile
>
> my advise.. run
>
> On Tue, Apr 16, 2013 at 3:29 PM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:
>
> Jasco is going to be the best stripper to remove the epoxy. Be careful using this product. If you are in a closed area I recommend wearing a respirator. Avoid contact with your skin, ventilate the area.
>  
> Are you sure you want to do this JOB ??
>  
> The sealer has a high risk of failure. If any moisture get under the sealer  then it will start to come off and turn white. High risk job , n=make sure you get paid well for this work.
>  
> John E Freitag
> Director
> The Stone & Tile School
> Office 407-567-7652
> Cell 407-615-0134
> jfreitag@thestoneandtileschool.com
>  
> <image001.jpg>
>  
> www.thestoneandtileschool.com
>  
>  
>  
> From: paul maclin [mailto:paul@techstone.com]
> Sent: Tuesday, April 16, 2013 2:50 PM
> To: Stone and Tile PROS Technical Support
> Subject: RE: [sccpartners] Mexican tile
>  
> John,
> What will remove epoxy finishes? Jasco im assuming
>  
> Also I have a client asking me to apply an epoxy sealer in her shower.Any recommendations on a user friendly epoxy sealer or any topical sealer ? I tried talking her out of it but she wants it done any ways. I had her sign a release of liability form.
>  
> On Tue, Apr 16, 2013 at 11:31 AM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:
> There are products you can buy at Home Depot for Mexican tiles.  If you have
> to strip the finish off the tile be careful test to see what stripper will
> remove the finish. If it is an epoxy finish you need to strip I would
> recommend you walk away from the job.
> If you only have to apply a finish then use a wax or Mexican tile finish.
>
>
> John E Freitag
> Director
> The Stone & Tile School
> Office 407-567-7652
> Cell 407-615-0134
> jfreitag@thestoneandtileschool.com
>
>
>
> www.thestoneandtileschool.com
>
>
>
> -----Original Message-----
> From: Vince Pezzano [mailto:vince@pezzanocontracting.com]
> Sent: Tuesday, April 16, 2013 9:49 AM
> To: Stone and Tile PROS Technical Support
> Subject: [sccpartners] Mexican tile
>
> What is the process for re sealing Mexican tile ?
>
> Vincent R. Pezzano
> 239-438-6181
> Sent from my iPhone
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
>  
> --
> Paul Maclin
> Techstone
> Box 22561
> Carmel, CA 93923
> www.techstone.com
> paul@techstone.com
> O: 831.372.2220 f: 375.4732
> ________________________________
> Powered by http://DiscussThis.com
> Visit list archives, subs
> ________________________________
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences
> Start a new conversation (thread)
>
>
> --
> Frederick M. Hueston PhD
> www.stoneforensics.com
> www.stoneandtilepros.com
> www.safeandcompliant.net
> Recommended stone care products  http://www.stonecarecentral.com/?Click=2149
> Many of my articles can be found at www.stoneandtilepros.com
> Listen to my radio show   www.blogtalkradio.com/drfred
> office             321 514 6845      
> See my specialty products at  www.godrfred.com
> ________________________________
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences
> Start a new conversation (thread)
>
> ________________________________
>
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences
> Start a new conversation (thread)
>
> ________________________________
>
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences
> Start a new conversation (thread)