Lol Mike you read my mind probably gonna try twister with 5x at the end of the month 

Sent by iPhone 
Dayron Padilla
Perfect Marble


On Jun 15, 2013, at 2:25 AM, "Mike Marsoun" <nulifesc@bigpond.com> wrote:

Awesome Baird. I live those out of the box solutions!  Been also thinking about trying something like that, particularly like an 800 twister pad with some 5x, just to see what you would get...

 

From: Baird Standish [mailto:bairdstandish@gmail.com]
Sent: Saturday, 15 June 2013 11:50 AM
To: Stone and Tile PROS Technical Support
Subject: RE: [sccpartners] Wax

 

Tony, We recently did a Job where we successfully removed a stonelok finish and imparted a satin Finish on a cementious small aggregate terrazzo floor by combining 150 grit honing powder and 5x. Didn't require stripper and the stonelok was pretty tough stuff      but on the thin side.   We tried different approaches on sample boards of tiles coated with the stonelok and this worked the best. We started the project first by honing with the powder and then lightly polishing. We then combined the two into one step and found it worked just as well with the same result. The acrylic may be thicker than the stonelok which may affect the process.  

B


Sent from Mailbox for iPhone

 

On Thu, Jun 13, 2013 at 8:41 PM, propartner ken <propartner@marbleperfect.com> wrote:

Hi Tony,

yes we do after stripping a floor once or twice and there might still be some wax that is not completely removed

we just did this last week on 2500 ft of limestone. spread some stripper out in a 10 by 10 and add 150 grit honing

powder to it. be carefull not to use to much powder you will dry up you stripper thats on the floor. work it with a weight

loaded floor machine and a maroon lightning strip pad. we think it work great because removing all the wax from the

pores of the stone is such a beeeaaarrrrch..........

Ken De Melis

Marble Perfect

 

On Thu, Jun 13, 2013 at 8:00 PM, Tony Warney <tony@excelstoneandtilecare.com> wrote:

Hi John,

No we are not trying to strip and hone at th same time. We have been getting a number of stone floors especially travertine that have been waxed. We strip them first and then hone. Sometimes there will be some wax that you don,t see until the floor completely dries. I was wondering if putting a little bit of stripper in the water might help?

Thanks Tony

 

On Thu, Jun 13, 2013 at 4:10 AM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:

No I haven’t wondering why you would want to?

If you are trying to strip and hone at the same time the stripper would probably coat over the honing powders and not have much if any cutting effect.

 

 

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

 

<image001.jpg>

 

www.thestoneandtileschool.com

 

 

From: Tony Warney [mailto:tony@excelstoneandtilecare.com]
Sent: Wednesday, June 12, 2013 11:14 PM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] Wax



 

--

Tony Warney

Excel Stone and Tile Care


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

 


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

 


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 3199/6400 - Release Date: 06/10/13


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 3199/6403 - Release Date: 06/11/13


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)