Thanks guys!

CJ Crow
In HIS grip
Sent from my iPhone

On Jun 20, 2013, at 6:20 PM, "Baird Standish" <bairdstandish@gmail.com> wrote:

We recently stripped a coating off of a travertine floor using cathedral products acrylic sealant remover, which was recommended in this forum. What worked really well was a light coat applied for a few minutes and then stripping the sealant with a razor blade. Not much mess and came out pretty clean. This might work for the coating on the terra cotta. I have run into coatings lightly applied to Mexican tile to add yellow highlights. This might be similar. I think, then, a good terra cotta sealer from sparks or Aldin would do the trick. 
B
—
Sent from Mailbox for iPhone


On Wed, Jun 19, 2013 at 8:59 AM, stuart rosen <mail@stoneshine.com> wrote:

If they are painted or dyed which may be why there is color bleed off in the grout .
You would want to use a stripper that wont take out of degrade the color.
Maybe a light dilution of a wax stripper that doesn't contain butyl or has a low amount.
I think a product called ultra-strip may work if you can get it.-test first.
Maybe a high alkaline cleaner would get it off.
 


On Wed, Jun 19, 2013 at 8:19 AM, CJ Crow <cjcrow@stonemaintenanceinc.com> wrote:
Hey Stuart, what do you think would be a safe product to remove the rest of the film on these tiles?

There were a couple of spots where the grout appeared to have some brown spots. Looked like traffic stains at first glance to me.

Thanks buddy!

CJ

In HIS grip
Sent from my iPhone

On Jun 18, 2013, at 8:43 PM, stuart rosen <mail@stoneshine.com> wrote:

Looks like a terracotta tile painted or stained and coated prior to installation.
The grout lines look clean with no sign of  a coating.
Hey is that (close up pic) a little brown color in the grout line?
Just guessing here-
I would call those etch like looking things etches anyway. Looks like they etched the coating and probably best to remove them so they don't show up in the new coating. I think we would clean off the residue lightly and recoat with something like TK6(Richard James) or dress up from sparks.


On Tue, Jun 18, 2013 at 5:22 PM, CJ Crow <cjcrow@stonemaintenanceinc.com> wrote:
Hello everybody! I looked at this floor today that appears to be clay or something similar (not sure). Home owner said it was hand made in Italy. Carpet cleaning company came in and partially stripped off a semigloss sealer or light wax that was on the stone (see pics). No damage to stone. Just marks where topical sealant was removed and crusty white build up in corners and along edges. Should I strip and apply another wax type coating? Home owner wants it to look like it did which as I said looked like a semigloss finish. The ring marks are where company must have left machine on for a longer period of time time. They are not etches, but rather where finish has been removed.


Thanks!

<image.jpeg>
<image.jpeg>
<image.jpeg>



--
Regards,
Stu Rosen
201-446-1200
www.mbstonecare.com 
 

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)


Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)