Ok Fred,

So your saying take and dry reading and that’s is you baseline for dry stone and measure the floor and how big of a difference will there be for dry and wet on the meter?

 

Hector

 

From: Fred Hueston [mailto:fhueston@gmail.com]
Sent: Friday, July 19, 2013 8:18 AM
To: Stone and Tile PROS Technical Support
Subject: RE: [sccpartners] Re: [sccpartners] Crema Marfil effloresence

 

I use a Ryobi, you can buy at Home depot or Lowes. Moisture readings on stone are relative, it wont give you the exact percentage of moisture.  I would take a reading on a dry piece of stone and compare it to what you get on the meter.

 

On Fri, Jul 19, 2013 at 9:25 AM, hectorcastillo@comcast.net <hectorcastillo@comcast.net> wrote:

What machine do you use for the reading and what reading is wet and what is dry?  . We looking for ?
How you dry it?

Sent from my HTC EVO 4G LTE exclusively from Sprint

 

----- Reply message -----
From: "Fred Hueston" <fhueston@gmail.com>
To: "Stone and Tile PROS Technical Support" <sccpartners@stoneandtilepros.com>
Subject: [sccpartners] Crema Marfil effloresence
Date: Fri, Jul 19, 2013 4:30 AM

 

Take some moisture readings. I am assuming the floor is a slab on grade?

 

On Thu, Jul 18, 2013 at 11:44 PM, stuart rosen <mail@stoneshine.com> wrote:

I guess the open veins could be a sign of too much crystalizer  or spalling.

Or a real crappy crema.

 

On Thu, Jul 18, 2013 at 10:38 PM, J. Palacio <flooramor@aim.com> wrote:

The water traveled down the veins, most likely they were opened up.


On Jul 18, 2013, at 9:43 PM, stuart rosen <mail@stoneshine.com> wrote:

What is the condition of the grout lines-sounds like there may not be any grout in the joints.

The water went below the stone and then came the eff. Didn't know it could happen that fast either.

Needs to dry out.

 

On Thu, Jul 18, 2013 at 9:04 PM, J. Palacio <flooramor@aim.com> wrote:

Did you try the 11,000 grit pad you have? 

 

On Jul 18, 2013, at 8:26 PM, Dayron Padilla <dayron@perfectmarblefloors.com> wrote:

I was feeling pretty lousy today, caught a bug in South America and been feeling it ever since I got back.  My guys were working today, and my dad also was doing a job as well.  It was a crema marfil full of veins everywhere.  He honed and powder polished the floor and it turned out great. While he was cleaning up and others were loading truck. He saw effloresence after less than 1/2 after he finished and it was concentrated on the veins of the crema.  After calming him down ( he was about to crystallize floor aaaaggghhhh) he said there was some efflorensence in only a small area before he started.

What has me perplexed is the speed of which the efflorensce came about.  Has anyone encountered this this quick.  The home was no where near the beach and it was inside the home ( we live in south florida )

I will go tomorrow to see the floor and keep you informed
--
Dayron Padilla

Perfect Marble Restoration

(305) 970-0213
Chairman of Chapter 7:

I..I.C.R.C./ A.N.S.I   S10 Stone Dimension Standard



 

--

Many of my articles can be found at www.stoneandtilepros..com

Listen to my radio show   www.blogtalkradio.com/drfred

office             321 514 6845      

See my specialty products at  www.godrfred.com

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)



 

--

Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com

www.safeandcompliant.net


Recommended stone care products  http://www.stonecarecentral.com

 

Many of my articles can be found at www.stoneandtilepros.com

Listen to my radio show   www.blogtalkradio.com/drfred

office             321 514 6845      

See my specialty products at  www.godrfred.com

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)