Thanks hector   You get much work with the system

Sent from my iPhone

On Aug 9, 2013, at 3:42 PM, "Hector Castillo" <hectorcastillo@comcast.net> wrote:

This the best tool I have found.

 

http://www.glassrenu.com/home.htm

 

I have the kit got it a long time ago.

 

Call me if you need some help.

 

Hector Castillo

805-739-0169

 

 

 

From: Justin [mailto:justin@jmcstoneandtilecare.com]
Sent: Friday, August 09, 2013 3:35 PM
To: Stone and Tile PROS Technical Support
Subject: RE: [sccpartners] Glass

 

Thanks for all the suggestions. I'm going to take a look on Saturday. For all I know it might need a specialty tool called a fingernail ;)

Thanks

Justin

Sent from my iPhone


On Aug 9, 2013, at 3:01 PM, "Tim @ Classic Marble Restoration" <marblerenu@aol.com> wrote:

Try some of the glass cooktop cleaners/polishes.

Tim Lesnar
Classic Marble Restoration
763-784-2483 office
612-250-0041 cell

Fred Hueston wrote:


the only acid that will etch glass is Hydrofluric acid. It could also be alkaline deposits. As John suggested I would try a tin oxide based polishing powder on it. If that doesnt work, there are glass abrasives, but they will cost to much to make one little repair

 

On Fri, Aug 9, 2013 at 3:48 PM, Justin <justin@jmcstoneandtilecare.com> wrote:

Hi John
It's a clear window glass. I'm not sure what the homeowner used but it dripped on the window. Didn't wipe it off and now it won't come off. I didn't know if there is some way of buffing it out.

Sent from my iPhone


On Aug 9, 2013, at 12:19 PM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote:

> Justin,
> I've not seen cleaner etch glass unless it's a very aggressive acid.  You
> will need to try some soft abrasives to try and remove the etch. Is this a
> clear glass or a frosted glass , textures glass ??
>
>
> John E Freitag
> Director
> The Stone & Tile School
> Office 407-567-7652
> Cell 407-615-0134
> jfreitag@thestoneandtileschool.com
>
>
>
> www.thestoneandtileschool.com
>
>
>
> -----Original Message-----
> From: Justin [mailto:justin@jmcstoneandtilecare.com]
> Sent: Friday, August 09, 2013 2:24 PM
> To: Stone and Tile PROS Technical Support
> Subject: [sccpartners] Glass
>
> Have a customer who spilled some cleaner on a glass window. It seems to have
> etched the glass. Is there any glass polishing systems anybody recommends.
> Justin
>
> Sent from my iPhone
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>

--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com




 

--

Frederick M. Hueston PhD
www.stoneforensics.com
www.stoneandtilepros.com


Recommended stone care products  http://www.stonecarecentral.com

 

Many of my articles can be found at www.stoneandtilepros.com

Listen to my radio show   www.blogtalkradio.com/drfred

office             321 514 6845      

See my specialty products at  www.godrfred.com

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)