I charge about 6 to 8 per foot test 1^st the floor so you will know how much work its going to be.

Hector Castillo

Hi Hector, there is no one magic bullet for all pavers.  We do about 2-3 paver floors per month.  The most common stripper I use is Diversify Pro Strip from Waxie Co.

I add about 1-2 cups of clear ammonia to the solution. Mix with the hottest water you can get. Mop on the floor (5 x 5 sections) scrub with floor machine and black stripping pad for about 10 minutes per section. Vacuum before you rinse. Use cold water to rinse not hot. In our arsenal we also have gel strippers and heavy duty strippers with tri chlor. Aqua mix sealing and coating remover works well, let it dwell and not dry. So many different sealers have been used on pavers over the years there is no one answer. If you need more info please e-mail me. Hope this helps.  Always test before giving the client a price.

Tony Warney

 

On Tue, Sep 17, 2013 at 5:23 PM, hectorcastillo@comcast.net <hectorcastillo@comcast.net> wrote:

Test the floor for a striped what will remove the sealer floor buffer and a brush use the black One. Pressure clean the floor low psi 800 .see how the floor looks after redo till sealer is gone. Clean grout with dry steam for good detail cleaning . Then move on to the next section do about 6*6 area at a time. After that set fans for drying. Test floor for dryness with a meter. Before and after cleaning .after floor is dry use a local sealer for that type of tile coat by hand and don't let sealer pool in low spots. Seal floor about 3 to 4, times.  Hope this helps. Hector Castillo

Sent from my HTC EVO 4G LTE exclusively from Sprint

----- Reply message -----
From: "Micah" <micahgautier@gmail.com>
To: "Stone and Tile PROS Technical Support" <sccpartners@stoneandtilepros.com>
Subject: [sccpartners] saltillo tile, terra-cotta tile
Date: Tue, Sep 17, 2013 4:41 PM


Can anyone explain the process of stripping/cleaning/resealing this type of tile and the products you use on it? I have a client begging me to restore her's and is willing to let me experiment on it, so some direction on this would be appreciated

Thx

Micah
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

 

--

Tony Warney

Excel Stone and Tile Care

www.excelstoneandtilecare.com

760-788-9400

---

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)