Thank you Adam. My I ask how much you got for the 300 sq ft?

Sent from my HTC smartphone on the Now Network from Sprint!

----- Reply message -----
From: "Adam" <info@restoreyourtiles.com>
To: "Stone and Tile PROS Technical Support" <sccpartners@stoneandtilepros.com>
Subject: [sccpartners] Leather look finish
Date: Fri, Oct 11, 2013 12:15 pm

I have done it on limestone. Suggest to do the sample first to get approved by customer. Also add the cost of the tooling to the job. Brushes cost between $50 and $120 each and you will need at least 12 of them.

I bought 3 sets of hand brushes (70, 120, 220 grit) and custom mount them to the driver plate with 5/8-11 bolts.

Cut the floor with 50 resins (may use metals in the future), then used brushes about 10 min / section. I also used 15" floor machine because too much weight will wear off brushes quicker. 300 sq ft took about 14 men hrs.

Last step - charge accordingly.

Good luck

Adam Bartos

BiO Tile & Grout Restoration

773-575-5515 (c)

847-438-0212 (o)

www.RestoreYourTiles.com

On Oct 11, 2013, at 10:55 AM, cpstaples@msn.com <cpstaples@msn.com> wrote:

Hello everybody,
who would like to teach an old dog a new trick.. I just left the job and they are looking to leather finish approximately 500 square feet of a polished pink marble. Who has done this and what system have they used. As always any help would be much appreciated.

Sent from my HTC smartphone on the Now Network from Sprint!

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)