I would still not use caulk it will fail also, if the crack is largeuse backer rod behind the caulk.

Over time all caulking grout in a shower is going to get mold. That because the caulk to coming loose from the areas. Grout will crack within a year or less and the customer continues to use the shower than the shower pan fill with water and you have a larger problem.

The problem with grout it will not bond to the finished edge of the tile there fore is doomed to fail.

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

schoollogo

www.thestoneandtileschool.com

From: Bernd Wessler. [mailto:Bernd@srsdetroit.com]
Sent: Tuesday, March 25, 2014 12:49 PM
To: Stone and Tile PROS Technical Support
Subject: RE: [sccpartners] Caulking shower corners

I agree with you Hector, that looks like a crack from settling. Now that it has, just regrout it. Caulk will fail or get moldy in that large of a joint. When you apply that much caulk it will shrink noticeably. It is not designed for large gaps.

Sent from my LG G2, an AT&T 4G LTE smartphone

------ Original message------

From: Hector Castillo

Date: Mon, Mar 24, 2014 8:52 PM

To: Stone and Tile PROS Technical Support;

Subject:RE: [sccpartners] Caulking shower corners

Hi Stuart

I have fix these problems in the past.

1^st never use caulking in a shower floor. It will always turns moldy.

I would cut the caulking and grout out. Clean the tile if needed. Clean the grout if needed.

Dry the shower with a dehumidifier 1 to 2 days with a fan, check and see when the mastic dry by eye sight. If dark gray it will turn light gray.

Measure the amount of water coming out per day in a 5 gallon bucket make black marks on side of bucket for seeing when it dries out.

After its dries out match color of sanded grout with color chart bar chip set.

Mix grout with grout harder and install and wait 2 days for grout to cure. Seal on the 3 day and get paid.

I charge about 450 to 1500. for this type of repair sometimes more depends on time spent.

I try and charge about 150 to 175 per hr for this work

Hector Castillo

Innovative Surface Restoration

805-739-0169

From: Stuart Young [mailto:santafefc@sbcglobal.net]
Sent: Monday, March 24, 2014 2:18 PM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] Caulking shower corners

Hi, partners,

The attached are photos of a shower floor joint where it joins the wall. It appears that the caulk is coming loose in the corners. What is the best way to remedy this problem, and to keep water from penetrating in these areas? Grout, caulk, both? Any methods or products that do better than others?

Thank you,

Stuart Young

Santa Fe Floor Care

Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences
Start a new conversation (thread)