My question is what do you do with 4 guys on 1800 sq.ft. just the electrical cord and equipment would clutter the work site. Unless there are 2 of the guys being slurry suckers.
Based upon my calculation using a timing system this job should take approximately 95 to 100 man hours based upon minimum lippage and hand work on the edges . plus drive time to and from the job site .
John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
www.thestoneandtileschool.com
From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Steve Kivinski
Sent: Thursday, May 15, 2014 9:37 AM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: [sccpartners] onyx vanity
It is 1800 square feet...I have flattened marble floors before but never onyx..one of my competitors told customer it would take 4 guys 7 days to do it...that's what raised red flag for me...thanks a lot for help!
On May 15, 2014 9:31 AM, "stuart rosen" <mail@stoneshine.com> wrote:
How many sq ft is your floor.
It sounds like you haven't flattened a floor before.
The first one you do-no matter how you prepare for it will be challenging.
It will definitely take more time than you will plan for!
The onyx will cut fast-there are other issues to be more concerned with.
What type of machine do you run, pad drivers, diamonds and how you place or affix them so you aren't chasing them for the better part of the day.
Its your choice which metal grit you will start with but for onyx I would start with a 70 metal full face tool with a good bevel.
Then run a 120 grit copper to transition to resin diamonds. Take it too 800 grit and polish.
You will need a good system for polishing as onyx will etch easily.
What type of grout was used and how extreme is the lippage. Those two questions are key to your success.
On Thu, May 15, 2014 at 8:06 AM, Steve Kivinski <steve@potomacstonecare.com> wrote:
In terms of grinding time, does it take a lot longer to grind onyx than marble...I though onyx was much harder... trying to get an idea of how long it will take..thanks again,,! Steve
On Sep 20, 2012 10:02 PM, "Roger Konarski" <qm144@yahoo.com> wrote:
Very easy to polish ! I like Stone Care Central 5 inch diamonds. they do not leave scratch patterns - then 5 X
From: "kdasilva@marbledoctorstonecare.com" <kdasilva@marbledoctorstonecare.com>
To: Stone and Tile PROS Technical Support <sccpartners@stoneandtilepros.com>
Sent: Thursday, September 20, 2012 4:47 PM
Subject: [sccpartners] onyx vanity
To everyone,
We are doing a restoration job for an entire apartment in Manhattan and they have a onyx vanity and sink in one of the bathroom which have become dull and needs some facelift .
They were originally polished, but across time and use they have lost their
sheen. I have no experience with onyx. Does it polish like marble? Is it
hard like granite? I haven't the slightest idea. Any experience out
there polishing this stone?
Kelly DaSilva
Project Manager
Installing, Repairing and Maintaining of Natural Stone and Other Man Made Solid Surfaces in Both Commercial and Residential Settings. Serving the Tristate since 1996'
CT Office :289 White ST
Danbury CT - 06810
NY Office: 244 5th Avenue,Suite 2608 New York, NY 10001 (212)726-2518