Ron,

You going to need to remove the sealer that was applied. This is what is causing the different colors. The limestone is more porous on some areas and the sealer is darkening the limestone. . be careful removing the sealer that you don’t get water stains in the limestone.. when removing or cleaning the sealer out ,start from the bottom up. If you work you way from the top down you will have a high risk of streaks in the stone. check with Aqua Mix to see what chemical you need to remove their sealer.

Before committing to the job, TEST, TEST and TEST again.

John E Freitag

Director

The Stone & Tile School

Office 407-567-7652

Cell 407-615-0134

jfreitag@thestoneandtileschool.com

www.thestoneandtileschool.com

From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Ron Moore
Sent: Tuesday, June 03, 2014 10:11 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Limestone

Partners,

My client has an owner who has extremely high standards. They have installed these very expensive wall panels and the owner wants them 100% consistent. He doesn't want any variation from panel to panel. The limestone has been sealed with Aqua Mix Pro, and now we can see very distinct differences in shades. I've explained natural stone to him.........He wants us to deliver one shade. Throughout. It can be darker.  Suggestions?  Pictures Attached.

Ron

Visit list archives, subscribe, unsubscribe or change your subscription 

preferences:

http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread): 

sccpartners@stoneandtilepros.simplelists.com