Try Hot stuff pro kit at Granite city tool. Also try procaliberproducts   They have glue syringe (paste and flowing) kits that involve curing with UV light that is supplied with kit. 
B


________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160
www.facspecs.com

On Jul 20, 2014, at 9:22 PM, Justin <justin@jmcstoneandtilecare.com> wrote:

Thanks

Sent from my iPhone

On Jul 20, 2014, at 6:01 PM, "Scott Wilson (via sccpartners list)" <nobody@simplelists.com> wrote:

This email was sent from aol.com which does not allow forwarding of emails via email lists. Therefore the sender's email address (polishedrock210@aol.com) has been replaced with a dummy one.


Sent from my iPad

On Jul 20, 2014, at 5:59 PM, Justin <justin@jmcstoneandtilecare.com> wrote:

Thanks 

Sent from my iPhone

On Jul 20, 2014, at 5:54 PM, Baird Standish <bairdstandish@gmail.com> wrote:

B


________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160

On Jul 20, 2014, at 8:14 PM, stuart rosen <mail@stoneshine.com> wrote:

My Pleasure-You will see there are so many products out there.
You can get as creactive as you want or are being paid to be.
CA can be easy to apply and work with.
Just make sure you protect under the area you are working on as it will drip though.


On Sun, Jul 20, 2014 at 8:11 PM, JMC Stone and Tile Care <justin@jmcstoneandtilecare.com> wrote:
thanks stu
there not looking for perfection they just want the broken piece glued back.  Majority of the break will be covered by the faucet fixture.  
thanks again
justin

On Jul 20, 2014, at 5:06 PM, stuart rosen <mail@stoneshine.com> wrote:

Justin
CA(cyanoacrylate) is one of the ways to go.
There are various viscosity you can use but thin is the most penetrating.
How wide is the crack. Send a pic if you like.
Whats nice about the CA is that you can overfill and then shave down with a razor held firm at 90 degrees.
Bonstone makes a two part express epoxy that comes in a 50ML syringe.
If the crack has some width to it this product could be an option.
You can get creative and use an small assortment of color like stone dust or pigment used lightly to enhance the fill.
Just don't overdo it. The clear glue will pick up the color of the stone if the crack is tight.
It might be prudent to shore up the broken piece as well.


On Sun, Jul 20, 2014 at 7:29 PM, Justin <justin@jmcstoneandtilecare.com> wrote:
Any recommendations on good adhesive to for broken granite. Piece broke where faucet is. There not looking for perfection just want it to be a strong bond.
Thanks
Justin

Sent from my iPhone
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com




--
Regards,
Stu Rosen
201-446-1200
"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com




--
Regards,
Stu Rosen
201-446-1200
"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com